Barbed Hose Fittings - Extreame Savings! Save up to 44%


Extreame Savings! Up to 44% off on Barbed Hose Fittings at Scranton Sewer. Top brands include AC PERFORMANCE, Joyway, Hayward, Anderson Metals, Jabsco, Generic, Banjo Corp, Dixon Valve & Coupling, LTWFITTING, Metalwork, Legines, EDGE INDUSTRIAL, & Pneumatics. Hurry! Limited time offers. Offers valid only while supplies last.



1/4 NPT Male to AN6 Barb 90 Degree Hose Fitting Adapters Aluminum 1/4 inch NPT Thread to 6 AN Hose Fuel Line Connector Black Anodized
1/4 NPT Male to AN6 Barb 90 Degree Hose Fitting Adapters Aluminum 1/4 inch NPT Thread to 6 AN Hose Fuel Line Connector Black Anodized
By AC PERFORMANCE
In Stock
$10.66
$5.99
You Save: 44%

mpn: AN842-6,

4.1 out of 5 stars with 55 reviews
Male npt thread to an hose barb adaptor. Use Teflon tape or sealing compound during assembly for proper sealing.Also available in different size and color, pls contact us for more information.Size: -6 an hose barb to 1/4'' npt male pipe / tube connector, Degree: 90 degree elbow. Made of high performance lightweight 6061-T6 cnc machined aluminum. Surface treatment: black anodized finish for durability and strength. AN adapter side seals on the flare (cone) not the threads and the NPT side seals


Joyway 3/8'' ID Hose Barb, Y shaped Type 1/2'' Female Thread Union Intersection/Split Brass Shut off Ball Valve Fitting
Joyway 3/8" ID Hose Barb, Y shaped Type 1/2" Female Thread Union Intersection/Split Brass Shut off Ball Valve Fitting
By Joyway
In Stock
$14.99

mpn: JWBTYKG8, ean: 0653445374351,

4.2 out of 5 stars with 55 reviews
This Joyway Y hose fitting is made of forged brass and connects and branches three hoses. This Y fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included). It is made of forged brass for greater strength than cast brass. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion,


Hayward SP1493 1-1/2-Inch MIP White ABS Quick Disconnect Econo Union with 1-1/2-Inch Hose Barb
Hayward SP1493 1-1/2-Inch MIP White ABS Quick Disconnect Econo Union with 1-1/2-Inch Hose Barb
By Hayward
In Stock
$11.36
$9.89
You Save: 13%

mpn: SP1493, ean: 0610377050166,

4.1 out of 5 stars with 46 reviews
Hayward quick disconnect econo union has a 1-1/2-inch MIP threaded end and a 1-1/2-inch hose barb on the other end. Made of ABS plastic material. Available in white color.Quick disconnect econo union. It has a 1-1/2-inch MIP threaded end and a 1-1/2-inch hose barb on the other end. Made of ABS plastic material. Available in white color. SP1493 Econo-Union 1-1/2 In Mpt X 1-1 Replacement Parts : SPX1491B(O Ring 129) / SPX1068C(Nut).


Anderson Metals Brass Garden Hose Fitting, Connector, 3/4'' Barb x 3/4'' Male Hose
Anderson Metals Brass Garden Hose Fitting, Connector, 3/4" Barb x 3/4" Male Hose
By Anderson Metals
In Stock
$18.13
$10.50
You Save: 42%

mpn: 07048-1212, ean: 0719852118589,

4.3 out of 5 stars with 30 reviews
This Anderson Metals garden hose connector is made of brass and connects hose to a female connector. This coupling has male garden hose threads (GHT) for connecting to a female GHT connector. The barbed stem creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included). This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.Hose fittings connect, control, change the


Hose Fitting F/Stainless. Deck Fitting
Hose Fitting F/Stainless. Deck Fitting
By Jabsco
In Stock
$24.33
$22.01
You Save: 10%

mpn: 31911-0002, ean: 0752064262886,

4.5 out of 5 stars with 16 reviews
Hose adapaterExtra 3/4'' GHT male hose adaptor suitable for HoseCoil. Water flow available with an easy twist of the fitting. Easy to install. Just combine the Quick Release Deck Washdown fitting with a Hose Coil Washdown hose and a high volume Jabsco PAR-Max 4 Washdown pump to keep the deck clutter free.


Generic Bar Production Stainless Steel 316 Barb Fitting Coupler / Connector 3/4'' Hose ID x 3/4'' Male NPT Air Fuel Water (Pack of 5)
Generic Bar Production Stainless Steel 316 Barb Fitting Coupler / Connector 3/4" Hose ID x 3/4" Male NPT Air Fuel Water (Pack of 5)
By Generic
In Stock
$22.99

mpn: S31639189905, ean: 0703546669754,

4.2 out of 5 stars with 47 reviews
Product Description Durable and high standard bar production class 150 stainless steel 316 barbed fitting connector. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way. Click ''honest-f'' to choose the product you want in our shop. Features - Materies:Stainless Steel 316. - Net Weight: 63.68g/pc. - Type: Male X hose Barb. - Tubing ID: 3/4'', Thread: 3/4'' NPT male. Important Note Pay attention to the column of size and color, you could find a


Banjo HB025-038SS Stainless Steel 316 Hose Fitting, Adapter, 1/4'' NPT Male x 3/8'' Barbed
Banjo HB025-038SS Stainless Steel 316 Hose Fitting, Adapter, 1/4" NPT Male x 3/8" Barbed
By Banjo Corp
In Stock
$10.76
$9.80
You Save: 9%

mpn: HB025-038SS,

4.1 out of 5 stars with 16 reviews
This Banjo HB025-038SS stainless steel hose adaptor has a 1/4'' male end for connecting to threaded pipe conforming to National Pipe Thread (NPT) standards and a barbed fitting for connecting to hose with a 3/8'' inside diameter. The barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately), and a male NPT fitting on the other end connects to threaded pipe to form a tight, fixed connection. This fitting


Dixon 179-1212 Brass Hose Splicer Fitting, Tee, 3/4'' Hose ID Barbed
Dixon 179-1212 Brass Hose Splicer Fitting, Tee, 3/4" Hose ID Barbed
By Dixon Valve & Coupling
In Stock
$10.79
$8.99
You Save: 17%

mpn: 179-1212, ean: 0697464427049,

4.4 out of 5 stars with 38 reviews
This Dixon 179 Series tee hose fitting is made of forged brass and connects and branches three hoses. This tee fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included). It is made of forged brass for greater strength than cast brass.Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that


Dixon EL8H8M Brass Hose Fitting, Insert 90 Degree Elbow, 1'' PTF Male x 1'' Hose ID Barbed
Dixon EL8H8M Brass Hose Fitting, Insert 90 Degree Elbow, 1" PTF Male x 1" Hose ID Barbed
By Dixon Valve & Coupling
In Stock
$24.68
$20.99
You Save: 15%

mpn: EL8H8M,

4.7 out of 5 stars with 45 reviews
This Dixon EL Series 90-degree elbow hose fitting is made of forged brass and connects hose to a female NPTF threaded connection. It has a barbed end to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included) and male National Pipe Taper Fine (NPTF) threads on the other to connect to female NPTF threaded connections. This 90-degree elbow is made of forged brass for greater strength than cast brass.Hose fittings connect, control, change the direction


LTWFITTING Bar Production Stainless Steel 316 Barb Fitting Coupler 1/2'' Hose ID x 1/2'' Female NPT Air Fuel Water (Pack of 5)
LTWFITTING Bar Production Stainless Steel 316 Barb Fitting Coupler 1/2" Hose ID x 1/2" Female NPT Air Fuel Water (Pack of 5)
By LTWFITTING
In Stock
$15.99

mpn: S31639158805, ean: 0703546671184,

4.8 out of 5 stars with 88 reviews
Product Description Durable and high standard bar production class 150 stainless steel 316 barbed fitting connector. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way. Click ''honest-f'' to choose the product you want in our shop. Features - Materies:Stainless Steel 316. - Net Weight: 33.53g/pc. - Type: Female X hose Barb. - Tubing ID: 1/2'', Thread: 1/2'' NPT female. Important Note Pay attention to the column of size and color, you could


Anderson Metals Brass Hose Fitting, Connector, 1-1/4'' Barb x 1'' Male Pipe
Anderson Metals Brass Hose Fitting, Connector, 1-1/4" Barb x 1" Male Pipe
By Anderson Metals
In Stock
$14.16
$9.89
You Save: 30%

mpn: 07001-2016, ean: 0719852124559,

4.0 out of 5 stars with 36 reviews
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Relative softness of brass threading when compared to other metals allows for a tight seal. Barbed shank provides secure connection to hose. Temperature range from -32 to +140 degrees F. Intended for use with hose clamp or crimp type ferrule (sold separately). These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..


Metalwork Brass Reducing Hose Barb Fitting Reducer 90 Degree L Right Angle Elbow Barbed 8mm to 6mm Hose ID, 5/16'' Barb x 1/4'' Barb, Fuel/Air / Water/Boat / Gas/Oil WOG (Pack of 2)
Metalwork Brass Reducing Hose Barb Fitting Reducer 90 Degree L Right Angle Elbow Barbed 8mm to 6mm Hose ID, 5/16" Barb x 1/4" Barb, Fuel/Air / Water/Boat / Gas/Oil WOG (Pack of 2)
By Metalwork
In Stock
$11.99

ean: 6627145143726,

4.2 out of 5 stars with 242 reviews
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing


Legines Brass Hose Splicer Fitting, Barbed Tee, 5/8'' Barb x 5/8'' Barb x 5/8'' Barb, 2 pcs
Legines Brass Hose Splicer Fitting, Barbed Tee, 5/8" Barb x 5/8" Barb x 5/8" Barb, 2 pcs
By Legines
In Stock
$17.99

mpn: 123-10, ean: 6208252172788,

4.1 out of 5 stars with 48 reviews
This hose fitting is made of brass and connects three lengths of hose in a branch tee. Barbed fittings create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately). This fitting is for a fixed connection between plastic or rubber hose. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The fitting has a temperature range of 32 to 200 degrees F. Pipe fittings are components


EDGE INDUSTRIAL 3/4 X 1/2 HOSE ID BRASS BARB REDUCER SPLICER FITTING FUEL/AIR/WATER/OIL/GAS/WOG
EDGE INDUSTRIAL 3/4 X 1/2 HOSE ID BRASS BARB REDUCER SPLICER FITTING FUEL/AIR/WATER/OIL/GAS/WOG
By EDGE INDUSTRIAL
In Stock
$10.95

mpn: E.I. BARB 89, ean: 0691023893382,

4.7 out of 5 stars with 20 reviews
3/4'' X 1/2'' Brass Barb Splicer Reducer Fitting. 150 PSI maximum working pressure. -40° to 160° temperature rating. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches3/4'' X 1/2'' Brass Barb Splicer Reducer Fitting. 150 PSI maximum working pressure. -40° to 160° Temperature Rating. Backed by EDGE


Dixon CAB150 Aluminum Hose Fitting, Complete King Short Suction Coupling Set with Brass Nut, 1-1/2'' NPSM x 1-1/2'' Hose ID Barbed
Dixon CAB150 Aluminum Hose Fitting, Complete King Short Suction Coupling Set with Brass Nut, 1-1/2" NPSM x 1-1/2" Hose ID Barbed
By Dixon Valve & Coupling
In Stock
$10.08
$10.07

mpn: CAB150,

4.7 out of 5 stars with 135 reviews
This Dixon CAB Series King short shank complete set hose fitting is made of aluminum with a brass nut and connects hose to threaded pipe conforming to the NPSM standard. It has a barbed end to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included), and male National Pipe Straight Mechanical (NPSM) threads on the other end connect to female NPSM threaded connections. This fitting is made of aluminum for lighter weight and resistance to corrosion and


Metalwork 304 Stainless Steel Barb Fitting, Coupler Adapter, Barbed Connector To Female Pipe, 1/4'' Hose Barb x 1/4'' NPT Female, 1 Pc
Metalwork 304 Stainless Steel Barb Fitting, Coupler Adapter, Barbed Connector To Female Pipe, 1/4" Hose Barb x 1/4" NPT Female, 1 Pc
By Metalwork
In Stock
$14.99

ean: 7453965851508,

4.2 out of 5 stars with 138 reviews
•This stainless steel hose adaptor has a female end for connecting to threaded pipe conforming to National Pipe Thread (NPT) standards and a barbed fitting for connecting to hose with a inside diameter. The barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately), and a female NPT fitting on the other end connects to threaded pipe to form a tight, fixed connection. This fitting is made of 304


Barb Fitting Brass Hose Fitting Barb Adapter Brass Hose Barb Connector Super-Deals-Shop (3/4(M) x1(B))
Barb Fitting Brass Hose Fitting Barb Adapter Brass Hose Barb Connector Super-Deals-Shop (3/4(M) x1(B))
By Pneumatics
In Stock
$12.39

mpn: BF, ean: 0653829552504,

4.7 out of 5 stars with 203 reviews
Brass Hose Barb Fitting is machined barb from a solid brass stock using CNC machine center. This brass fitting has thicker walls and long length; this product can be used with PVC, PU, Rubber hose or tubing and to be secured with a hose clamp or crimped ferrule. WARNING! California Proposition 65 PRODUCT CONTAINS LEAD!!! Do not contact with food and drinking water 1'' Barb X 3/4'' NPT Male End - Machined Temperature Range: -65 ° F to 250 ° F Max Operating Pressure: 1000 PSI


EDGE INDUSTRIAL 3/8 ID X 1/4 MALE NPT NPT MIP BRASS HOSE BARB TEE SPLICER FITTING FUEL/AIR/WATER/OIL/GAS/WOG
EDGE INDUSTRIAL 3/8 ID X 1/4 MALE NPT NPT MIP BRASS HOSE BARB TEE SPLICER FITTING FUEL/AIR/WATER/OIL/GAS/WOG
By EDGE INDUSTRIAL
In Stock
$11.20

mpn: E.I. BARB 128, ean: 0713807492540,

4.2 out of 5 stars with 181 reviews
3/8'' ID Hose Barb x 1/4'' Male NPT Brass Barb Tee Union Fitting. 150 PSI maximum working pressure. -40° to 160° temperature rating. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches3/8'' ID Hose Barb x 1/4'' Male NPT. 150 PSI maximum working pressure. -40° to 160° Temperature Rating. Backed by EDGE


Anderson Metals Brass Hose Fitting, Connector, 3/4'' Barb x 3/4'' Female Pipe
Anderson Metals Brass Hose Fitting, Connector, 3/4" Barb x 3/4" Female Pipe
By Anderson Metals
In Stock
$12.05
$9.99
You Save: 17%

mpn: 07002-1212, ean: 0719852122166,

4.9 out of 5 stars with 59 reviews
This Anderson Metals hose fitting is made of brass and connects hose to threaded pipe conforming to the National Pipe Thread (NPT) standard. This adapter is for a fixed connection between plastic or rubber hose and pipe made of copper, nylon, or plastic. A barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately), and a female NPT connector on the other end connects to threaded pipe. This fitting is


Dixon Boss MS11 Steel Hose Fitting, Stem, 1'' NPT Male x 1'' Hose ID Barbed
Dixon Boss MS11 Steel Hose Fitting, Stem, 1" NPT Male x 1" Hose ID Barbed
By Dixon Valve & Coupling
In Stock
$10.70
$7.99
You Save: 25%

mpn: MS11,

4.4 out of 5 stars with 39 reviews
This Dixon Boss MS Series stem hose fitting is made of plated steel and connects hose to a female NPT threaded connection. It has a barbed end to create a tight seal on a hose when used with a Boss clamp (not included) and male National Pipe Taper (NPT) threads on the other to connect to female NPT threaded connections. This Boss stem hose fitting is made of plated steel for greater corrosion resistance than unplated steel, and it has a Klingersil C-4401 nitrile, rubber bonded, non-asbestos



Viewing Page 1 of 6

View more products in Hose Fittings.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - scrantonsewer.org. All Rights Reserved.