Fittings - Page 3 - Huge Savings! Save up to 15%
Huge Savings! Up to 15% off on Fittings at Scranton Sewer, Page 3. Top brands include GF Signet, Spartan Tool, Merit Brass, Dixon Sanitary, Spears Manufacturing, Parker Hannifin, Anvil International, Dixon Valve & Coupling, Snap-Tite, Alemite, FireHoseDirect, Smart Packs by OCSParts, Banjo Corp, Glacier Tanks, Kochek, & Smith-Blair. Hurry! Limited time offers. Offers valid only while supplies last.
GF Signet 3-2537-6C-P0 Integral Mount Paddlewheel Flow Sensor, Polypropylene Body, Black PVDF Rotor, Titanium Pin, 4 mA-20 mA Output, 0.5" to 4", 11"
4.6 out of 5 stars with 89 reviews
GF Signet 3-2537-6C-P0: Paddlewheel Flow Sensor PP. Specifications: GF Signet Integral Mount Paddlewheel Flow Sensor, Polypropylene body, black PVDF rotor, Titanium pin, FPM O-ring, 4-20 mA output.Compatibility: 8550, 8900, 9900, 9900-1BC. Installs into pipe sizes: DN15 to DN200, 0.5 to 8 in.
Stainless Steel 304/304L Butt-Weld Pipe Fitting, Type A MSS Stub End, Schedule 40, 8" Pipe Size
4.8 out of 5 stars with 126 reviews
The Merit Brass type A MSS stub end is a schedule 40 stainless steel 304/304L butt-weld pipe fitting designed for use with lap joint flanges for connecting pipes to other flanges or flat surfaces. This Type A stub end has a butt-weld, beveled opening for welding pipes together, a square inside corner, and an outside corner that’s been radiused to accommodate the lap joint flange. Made of stainless steel 304L, the low carbon content of this pipe fitting minimizes harmful carbide precipitation
Dixon High Pressure Bolted Sanitary Clamp, 304 Stainless Steel - 12"
4.3 out of 5 stars with 41 reviews
Dixon 13MHP High Pressure Clamps are constructed from 304 stainless steel and intended for use with sanitary Tri-Clamp fitting connections. The bolted design of this sanitary clamp allows it to withstand twice the pressure of a like sized hinge clamp. Furnished with 304 stainless steel bolts/lock washers and either bronze (1'' thru 8'') or brass (1/2'', 3/4'', 10'' & 12'') hex nuts. High pressure clamps are often a necessity where temperature fluctuations occur and PTFE gaskets are
Spears 466E Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Schedule 40, White, 8" IPS OD x 1" Socket
mpn: 466E-575, ean: 0054211324783,
4.6 out of 5 stars with 155 reviews
This Spears schedule 40 PVC clamp-on saddle has a socket outlet for connecting to male pipes or fittings, and is suitable for adding a 90-degree branch to a pipe. The saddle is made of white PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than metal. It has an EPDM (ethylene propylene diene monomer) seal for resistance to oil, water, and some solvents, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The
Parker A-Lok 8BLEN8-316 316 Stainless Steel Compression Tube Fitting, Cap, 1/2" Tube OD (Pack of 10)
4.8 out of 5 stars with 121 reviews
This Parker A-Lok BLEN-B series compression tube fitting is made of type 316 stainless steel, and connects to tubing on its open end. This cap is for closing the end of tubing made of stainless steel, nylon, or plastic, with a threaded cap for maintenance. A ferrule compression fitting connects to tubing for a leak-resistant seal. This fitting is made of chemically hardened type 316 stainless steel that provides higher strength and greater corrosion resistance than untreated stainless steel. It
Anvil 2150 Forged Steel Pipe Fitting, Class 3000, Socket Weld 90 Degree Elbow, 3" NPT Female
4.3 out of 5 stars with 209 reviews
The Anvil 2150 class 3000 90-degree elbow pipe fitting is made of forged steel and has socket-weld connections. This 90-degree elbow fitting, or ''ell,'' connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has female socket-weld ends with internal shoulders for connecting to unthreaded pipe ends. The joined pieces are welded together to create a tight seal against leaks. This fitting is made of steel for weldability and rust resistance and is forged to
6" Male Dry Hydrant Straight Adapter with Aluminum Cap
By Dixon Valve & Coupling
4.6 out of 5 stars with 196 reviews
Male red dry hydrant adapter with aluminum NH / NST cap. Material is light-weight 6061-T6 aluminum alloy. Comes attached to a schedule 40 PVC pipe to insert into a glue-on slip-socket adapter or elbow. All parts meet or exceed NFPA requirements. Our dry hydrant adapters fit all firefighting requirements as well as those for rural dry hydrant systems. Includes screen, cap, and chain.Dry hydrant sizes are determined by your local fire department. Please contact your local fire department before
Stainless Steel 304/304L Pipe Fitting, Concentric Reducer Coupling, Butt-Weld, Schedule 10, 10" X 6" Pipe Size
You Save: 2%
4.9 out of 5 stars with 279 reviews
The Merit Brass concentric reducing coupling is a schedule 10 stainless steel 304/304L butt-weld pipe fitting for joining two concentric pipes of different sizes. This concentric reducer coupling connects two pipes of different sizes along the common pipe axis. The coupling has butt-weld, beveled openings for welding pipes together. Made of stainless steel 304L, the lower carbon content of this coupling minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It
GF Signet PV8S040 PVC Clamp-On Saddle, 4"
You Save: 15%
sku: PV8S040, mpn: PV8S040, ean: 0638845439169,
4.2 out of 5 stars with 26 reviews
GF Signet PV8S040: Saddle, PVC 4.0 inch.4 in. PVC. With Pipe.
Snap-Tite SVHC8-8M Stainless Steel 316 H-Shape Quick-Disconnect Hose Coupling, Sleeve-Lock Socket, 1/2" NPTF Male x 1/2" Coupling Size
4.2 out of 5 stars with 200 reviews
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing
Alemite 8592 Plastic Used Fluid Drain
mpn: 8592, ean: 0643129997099,
4.2 out of 5 stars with 293 reviews
Alemite 26-GALLON USED FLUID DRAIN (8592)Portable upright configuration. Designed for use with pump-assist used fluid collection and transfer systems. Ideal for large multi-bay shops and applications or environments where movement is restricted. Features a 26 gallon reservoir molded of durable polyethylene for lighter weight, reduced corrosion and lower risk of damage to surrounding vehicles.
Red 3" x 50' Lay Flat PVC Camlock Lightweight Medium Duty Discharge Pump Hose
4.2 out of 5 stars with 194 reviews
Tube - Red Lay Flat PVCApproximate wall thickness - 0.090''Weight per foot - 0.50 poundsType of use - WaterWorking temperature - 170 degrees F to 5 degrees FRed lay flat PVC discharge hose with cam & groove quick connect fittings is rated for light to medium duty. This hose is designed to be used in lower range water pressure situations having a maximum pressure of 100 psi. This pump discharge hose is constructed from blue PVC and reinforced by polyester yarn. Popular hose for general outdoor
Oetiker 16700042 StepLess Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 29.9 mm (Closed) - 33.1 mm (Open) (Pack of 500)
By Smart Packs by OCSParts
You Save: 11%
mpn: 16700042-500, ean: 0765629763728,
4.5 out of 5 stars with 16 reviews
Genuine Oetiker Clamps Stainless Steel, Material no. 1.4301/UNS S30400 What is StepLess Technology? Oetiker invented the StepLess ear clamp in 1979. The ear clamp’s special design eliminates steps and/or overlaps on the inner circumference of the clamp for a 360° leak-free seal. Because the tongue resides in a groove, the “tongue-in-groove” feature exerts pressure on the assembled parts over 360°, enabling the clamp to apply a continuous radial force completely around the connection’s
Banjo TF075SS Stainless Steel 316 Bulkhead Tank Fitting, 3/4" NPT Female
4.4 out of 5 stars with 132 reviews
'Bulkhead Tank Fitting, Body Material 316 Stainless Steel, Pipe Size 3/4 In., Connection Type FNPT x FNPT, Required Hole Size 1-5/8 In., Gasket Material EPDM, Max. Pressure 150 psi, Length 1-27/32 In., Temp. Range -20 Degrees to 150 Degrees F'Price For: Each Body Material: 316 Stainless Steel Max. Pressure: 150 psi Temp. Range: -20 Degrees to 150 Degrees F Gasket Material: EPDM Connection Type: FNPT x FNPT Item: Bulkhead Tank Fitting Item: Bulkhead Tank Fitting Length: 1-27/32'' Required Hole
Glacier Tanks - Conical Hopper | Tri Clamp 4 in. x 12 in.
4.2 out of 5 stars with 264 reviews
Stainless steel conical hoppers, often paired with a grist hydrator, ease the loading of grain into a mash tun, or other brewing vessel.Material(s): SS304. Connection Type(s): Tri Clamp. Connection Size(s): 4 in..
Double Head Hydrant and Spanner Wrench Set
4.6 out of 5 stars with 238 reviews
Fire hydrant and spanner set includes:Pentagon heads up to 1 7/8 inchSquare heads up to 1 1/2 inchDouble hook spanner head fits 3/4 inch to 6 inch rocker lug or pin lug fittingsSpanner Wrench is strong, rugged wrench for rocker lug and pin lug couplings. Fits 3/4 inch through 6 inch pin or rocker lugs. Gas cock shut-off location provides maximum tool leverage and strength.Includes - 1 x Adjustable Hydrant Wrench Double Head Spanner. Includes - 2 x Universal Spanner Wrenches. Includes - 1 x
Dixon 600-AL-AL Aluminum Cam and Groove Hose Fitting, 6" Plug x 150# ASA Flange
By Dixon Valve & Coupling
4.1 out of 5 stars with 108 reviews
The Dixon aluminum cam and groove fitting has a straight body and two openings for connecting two hoses or pipes with cam and groove fittings. It has one male groove adapter end for connecting to female cam couplers and one flange end to connect to another flange or flange face. The body is made of aluminum for corrosion and tarnish resistance. This Dixon cam and groove fitting is suitable for use in commercial or industrial flow systems, such as water transport and treatment, waste management,
Smith-Blair Stainless Steel 304 Repair Clamp, Full Circle, Carbon Steel Bolt, 6 Bolts, 15" Length, 10" Pipe Size
4.7 out of 5 stars with 25 reviews
Full Circle Fabricated stainless steel lugs can be installed in tight spaces and may be used to join plain pipe of the same diameter. 304 stainless steel stud bolts. Single-band clamps have 360° gasket seal for support, and a 'keeper bar' that helps close clamp during installation. Steel nuts and bolts. Pipe Repair Clamps Use to repair pipe without dismantling connections and to join pipes without threaded connections. 304 stainless steel band and Buna N gasket. This listing is for each.