Browse Our Catalog

Float Valves - Super Savings! Save up to 40%


Super Savings! Up to 40% off on Float Valves at Scranton Sewer. Top brands include Kerick Valve, Jobe Valves, Robert Manufacturing, HydroLogic, Walfront, B&K Industries, Temco, Fityle, & Hicello. Hurry! Limited time offers. Offers valid only while supplies last.



Kerick Valve PF06 Polyethylene Sphere Float Ball, 6'' Diameter, 6'' Length, 1/4 Female Thread
Kerick Valve PF06 Polyethylene Sphere Float Ball, 6" Diameter, 6" Length, 1/4 Female Thread
By Kerick Valve
In Stock
$15.40
$11.84
You Save: 23%

mpn: PF06,

4.2 out of 5 stars with 40 reviews
This Kerick PF06 oval float ball is 6'' in diameter. It is made of polyethylene for resistance to corrosion and to deterioration from sunlight, is molded in one piece to resist leakage, and has 1/4''-20 female threads. It is intended for use with 3/8'' to 1'' inlet float valves and 1/4''-20 threaded rods (sold separately). As part of a float valve installation, it is suitable for use in a variety of applications, such as fountains, livestock water tanks, and chemical manufacturing plants.Float


Rojo Float Valve, 3/4'', Black/Yellow
Rojo Float Valve, 3/4", Black/Yellow
By Jobe Valves
In Stock
$33.00
$31.82
You Save: 4%

mpn: J-RJV20, ean: 9418817303015,

4.4 out of 5 stars with 207 reviews
Rojo float valves are float operated valves for automated filling of water storage tanks. It can be mounted above or below water, & is a simple, mechanically operated valve. The rojo is a good choice where its low flow is sufficient, & its compact, non-corrosive construction is beneficial. The rojo has an average expected flow rate of 5 GPM, & has a pressure rating of 0-150 PSI. The rojo valve is safe for potable water applications, & ETL listed to Nsf372Includes a tank fitting


Robert Manufacturing R400 Series Bob Red Brass Float Valve, 3/4'' NPT Male Inlet x 3/4'' NPT Male Outlet, 39.9 gpm at 85 psi Pressure
Robert Manufacturing R400 Series Bob Red Brass Float Valve, 3/4" NPT Male Inlet x 3/4" NPT Male Outlet, 39.9 gpm at 85 psi Pressure
By Robert Manufacturing
In Stock
$26.70
$25.36
You Save: 5%

mpn: R400-3/4,

4.0 out of 5 stars with 35 reviews
Standard Bob float valve assemblies consist of valve, brass stem, and float ball for positive water level control. Applicable for precision liquid level control, aggressive water applications, increased resistance to corrosion and chemicals, de-ionized, ultra pure, and reverse osmosis water, boiler feed water systems, kitchen steam tables, cooling towers, evaporative coolers, livestock waterier, car wash, high pressure wash, swimming pools, industrial tanks, food service and sanitary


Kerick Valve PT100SS PVC Float Valve, Tank Mount, 60 gpm at 60 psi, 1'' NPT Male
Kerick Valve PT100SS PVC Float Valve, Tank Mount, 60 gpm at 60 psi, 1" NPT Male
By Kerick Valve
In Stock
$32.54

mpn: PT100SS,

4.2 out of 5 stars with 150 reviews
This Kerick PT100SS float valve is a tank-mount style and is made of PVC with 18-8 stainless steel hardware. The valve has lever brackets on both the top and bottom of the valve with a different fulcrum position for each bracket, which allows a ''low'' and ''high'' flow rate at a particular pressure. This valve has a 0.69'' orifice with a ''low'' estimated rate of flow of 42 gallons per minute (gpm) at 30 pounds per square inch (psi) and 56 gpm at 60 psi and a ''high'' estimated rate of flow of


Kerick Valve PT050525 PVC Float Valve, Tank Mount, 12.5 gpm at 60 psi, 1/2'' NPT Male
Kerick Valve PT050525 PVC Float Valve, Tank Mount, 12.5 gpm at 60 psi, 1/2" NPT Male
By Kerick Valve
In Stock
$15.85
$15.75

mpn: PT050525,

4.2 out of 5 stars with 268 reviews
This Kerick PT050525 float valve is a tank-mount style and is made of PVC with 18-8 stainless steel hardware. The valve has a 0.25'' orifice and its estimated rate of flow is 7.7 gallons per minute (gpm) at 20 pounds per square inch (psi) and 12.5 gpm at 60 psi. The valve inlet and outlet have 1/2'' NPT male threads and the inlet has extended threads with a sealing washer and jam nut for mounting through a tank wall. The valve is made of National Sanitation Foundation (NSF) approved PVC


Robert Manufacturing R400 Series Bob Red Brass Float Valve, 1'' NPT Male Inlet x 1'' NPT Male Outlet, 68.5 gpm at 85 psi Pressure
Robert Manufacturing R400 Series Bob Red Brass Float Valve, 1" NPT Male Inlet x 1" NPT Male Outlet, 68.5 gpm at 85 psi Pressure
By Robert Manufacturing
In Stock
$36.67

mpn: R400-1,

4.6 out of 5 stars with 196 reviews
Standard Bob float valve assemblies consist of valve, brass stem, and float ball for positive water level control. Applicable for precision liquid level control, aggressive water applications, increased resistance to corrosion and chemicals, de-ionized, ultra pure, and reverse osmosis water, boiler feed water systems, kitchen steam tables, cooling towers, evaporative coolers, livestock waterier, car wash, high pressure wash, swimming pools, industrial tanks, food service and sanitary


HydroLogic 27020 Reverse Osmosis System Float Valve
HydroLogic 27020 Reverse Osmosis System Float Valve
By HydroLogic
In Stock
$17.15
$15.25
You Save: 11%

mpn: HYDROLOGIC-27020, ean: 0812111010096,

4.0 out of 5 stars with 43 reviews
By helping to keep the water in your reverse osmosis filtration system at an appropriate level, the 27020 Hydrologic float valve helps help you to both save resource and avoid the risk of a flooded reservoir. A genuine OE part that goes into place quickly and easily with 3/8 inch Quick Connect fittings.Keeps water at appropriate levels in your RO system. Helps minimize the risk of your system reservoir flooding. Genuine OEM Product. Made in the USA. This is an O.E.M. part.


Robert Manufacturing PF Series Bob Spherical Polypropylene Float, 3/8''-16 Female Spud, 8'' Diameter, 158 oz Buoyancy
Robert Manufacturing PF Series Bob Spherical Polypropylene Float, 3/8"-16 Female Spud, 8" Diameter, 158 oz Buoyancy
By Robert Manufacturing
In Stock
$20.80

mpn: PF8-2,

4.2 out of 5 stars with 292 reviews
Bob Polypropylene floats are corrosion resistant, lightweight and suitable for a broad range of destructive fluids. Female thread spud connection (for male thread on stem). Natural color polypropylene floats made with NSF listed material. PF8 is black UV resistant. PF8 (8''dia) is available with through hole. For open tank service only. Made in USA. 175 Degrees F max. 158oz Buoyancy.Corrosion resistant; lightweight. Suitable for broad range of destructive fluids. Natural color Polypropylene


Hilitand G1/2 DN15 Stainless Steel Pool Float Valve Automatic Floating Ball Valve for Water Tank Cistern
Hilitand G1/2 DN15 Stainless Steel Pool Float Valve Automatic Floating Ball Valve for Water Tank Cistern
By Walfront
In Stock
$12.99

mpn: Walfront8r9py25otz, ean: 0741870679407,

4.0 out of 5 stars with 236 reviews
Description: The float valve regulates water supply by controlling water level.As water level rises, so does float ball,and rod rises at the same time, which is connected to valve. When it rises to a certain position, the piston pad will close water supply. When water level drops, the connecting rod drives the piston pad to open. Features: Floating ball and rod are made of stainless steel which is durable and resistant to rust. The brass valve body is heathy and will not produce any


Kerick Valve PT75SS PVC Float Valve, Tank Mount, 37 gpm at 60 psi, 3/4'' NPT Male
Kerick Valve PT75SS PVC Float Valve, Tank Mount, 37 gpm at 60 psi, 3/4" NPT Male
By Kerick Valve
In Stock
$21.65
$21.05
You Save: 3%

mpn: PT75SS,

4.1 out of 5 stars with 215 reviews
This Kerick PT75SS float valve is a tank-mount style and is made of PVC with 18-8 stainless steel hardware. The valve has a 0.48'' orifice and its estimated rate of flow is 27.5 gallons per minute (gpm) at 30 pounds per square inch (psi) and 37 gpm at 60 psi. The valve inlet and outlet have 3/4'' NPT male threads and the inlet has extended threads with a sealing washer and jam nut for mounting through a tank wall. The valve is made of National Sanitation Foundation (NSF) approved PVC (polyvinyl


Kerick Valve MAB22 PVC Mini Float Valve, Tank Mount, Adjustable Arm, 1.5 gpm at 60 psi, 1/4'' Barbed
Kerick Valve MAB22 PVC Mini Float Valve, Tank Mount, Adjustable Arm, 1.5 gpm at 60 psi, 1/4" Barbed
By Kerick Valve
In Stock
$11.99

mpn: MAB22,

4.5 out of 5 stars with 239 reviews
All standard PVC bodies are made from NSF approved materials and replaceable seals are made of long-wearing, chemical resistant Santoprene rubber. Standard hardware is made of 18-8 stainless steel. Mini float valves are available with fixed or adjustable arms and are bulkhead mountable both horizontally and vertically. Valves have a .093 orifice, free flow outlet and have been tested to 100 psi. Maximum working temperature 100°F. Part numbers 23175, 23176, 23179 and 23180 include floats only.


Kerick Valve PF444-BK Polyethylene Square Float Ball, 4'' Width, 4'' Height, 4'' Length, 1/4'' Female Thread
Kerick Valve PF444-BK Polyethylene Square Float Ball, 4" Width, 4" Height, 4" Length, 1/4" Female Thread
By Kerick Valve
In Stock
$13.64

mpn: PF444-BK,

4.6 out of 5 stars with 20 reviews
This Kerick PF444-BK square float ball is 4'' wide, 4'' high, and 4'' long. It is made of polyethylene for resistance to corrosion and to deterioration from sunlight, is molded in one piece to resist leakage, and has 1/4''-20 female threads. It is intended for use with 3/8'' to 3/4'' inlet float valves and 1/4''-20 threaded rods (sold separately). As part of a float valve installation, it is suitable for use in a variety of applications, such as fountains, livestock water tanks, and chemical


Kerick Valve PF08-516 Polyethylene Sphere Float Ball, 8'' Diameter, 8'' Length, 5/16'' Female Thread
Kerick Valve PF08-516 Polyethylene Sphere Float Ball, 8" Diameter, 8" Length, 5/16" Female Thread
By Kerick Valve
In Stock
$18.75
$15.59
You Save: 17%

mpn: PF08-516,

4.0 out of 5 stars with 20 reviews
'Float Ball, 5/16-18 In Connection, Weight Less than 1 lb, Length 8 In., Dia. 8 In., Material of Construction Polyethylene, Female Threaded, For Use With G0712257'For use with 1-1/4'' and 1-1/2'' inlet float valves and 5/16''-18 threaded rods (sold separately). Polyethylene for chemical resistance. 5/16''-18 female threads for mounting. Molded in one piece to resist leakage.


B & K Heavy Duty Brass Float Valve
B & K Heavy Duty Brass Float Valve
By B&K Industries
In Stock
$10.49
$6.34
You Save: 40%

mpn: 109-901, ean: 0032888099012,

4.4 out of 5 stars with 35 reviews
Sold as each. Plastic float. Brass stem. Serrated adjustment with piston action shut-off design. Manufacturer number: 109-901. Country of origin: Taiwan. Distributed by BandK Industries.Plastic float. Brass stem. Serrated adjustment with piston action shut-off design.


1'' Brass Float Valve, True NPT - TEMCo Industrial, 5 Year Warranty 5 Year Warranty
1" Brass Float Valve, True NPT - TEMCo Industrial, 5 Year Warranty 5 Year Warranty
By Temco
In Stock
$15.99
$11.99
You Save: 25%

mpn: VA0006,

4.6 out of 5 stars with 27 reviews
Type: Brass Float Valve Size: 1'' Thread Type: True Tapered Male NPT Body Material: Brass Seal Material: NBR Ball Type: Polyethylene Max Pressure: 232 PSI Warranty: 5 Years Prop 65 Warning (California Residents): The Product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. Wash Hands After Handling.True NPT Tapered Male thread makes connection to standard plumbing predictable. Many imported valves use BSPP Straight threads with a


Fityle DN25/ 1inch Thread Float Ball Valve Floating Ball-cock Ballcock for Ponds, Aquariums, Aquaculture, Water Storage Tank
Fityle DN25/ 1inch Thread Float Ball Valve Floating Ball-cock Ballcock for Ponds, Aquariums, Aquaculture, Water Storage Tank
By Fityle
In Stock
$15.99
4.7 out of 5 stars with 226 reviews
Description:Quality Guaranteed: Made from excellent material, high temperature resistance, rust resistance and anti-aging, has a long service life.Environmentally Friendly: Safe and will not release any toxic substance.G1 (DN25) Thread: This float valve adopted G1 thread that is normally used, can fit many pipe connection.Strong Tightness: Design with a rubber gasket for better sealing and makes sure no leaking.Wide Application: Widely used in water boiler machine, rice steaming machine, water


Robert Manufacturing R400 Series Bob Red Brass Float Valve, 1/2'' NPT Male Inlet x 1/2'' NPT Male Outlet, 22 gpm at 85 psi Pressure
Robert Manufacturing R400 Series Bob Red Brass Float Valve, 1/2" NPT Male Inlet x 1/2" NPT Male Outlet, 22 gpm at 85 psi Pressure
By Robert Manufacturing
In Stock
$22.60

mpn: R400-1/2,

4.9 out of 5 stars with 287 reviews
Standard Bob float valve assemblies consist of valve, brass stem, and float ball for positive water level control. Applicable for precision liquid level control, aggressive water applications, increased resistance to corrosion and chemicals, de-ionized, ultra pure, and reverse osmosis water, boiler feed water systems, kitchen steam tables, cooling towers, evaporative coolers, livestock waterier, car wash, high pressure wash, swimming pools, industrial tanks, food service and sanitary


1Pc Adjustable Float Ball Cock Valve Water Tank Evaporative Cooler Tower 3/4''
1Pc Adjustable Float Ball Cock Valve Water Tank Evaporative Cooler Tower 3/4"
By Hicello
In Stock
$11.99
$11.88

mpn: SZ070090012412RK, ean: 0653334424143,

4.1 out of 5 stars with 145 reviews
This ball valve adopts the autolock theory to fasten the water flow rate, less control strength need for switching water, its max water pressure can be 1.6Mpa, mainly installed in water tanks, evaporative coolers, and cooling towers etc. The ball cock can be use on different water supply equipment, compared with brass valve and stainless valve , it's cheaper and more flexible. can be installed from different angle in water tank to adjust the water position. And if you have any further


Robert Manufacturing KB210 Bob 4 Piece Standard Plunger Kit for R400 and R700 1/2'' Brass Float Valves
Robert Manufacturing KB210 Bob 4 Piece Standard Plunger Kit for R400 and R700 1/2" Brass Float Valves
By Robert Manufacturing
In Stock
$12.26
$12.18

mpn: KB210,

4.2 out of 5 stars with 294 reviews
4 Piece standard plunger kit includes brass plunger, Buna-N disc and cup pre-assembled, R481 cotter pin. Kit for R400 and R700 1/2'' brass float valves.4 Piece standard plunger kit. Kit includes pre-assembled brass plunger, Buna-N disc and cup; R481 cotter pin. Kit for R400 and R700 1/2'' brass float valves. Not compliant with CA Prop 65 or Safe Water Drinking Act.


3/8inch MPT PVC Tank Mount Float Valve with .25inch Orifice
3/8inch MPT PVC Tank Mount Float Valve with .25inch Orifice
By Kerick Valve
In Stock
$37.80

mpn: PT383825, ean: 0653958437550,

4.3 out of 5 stars with 295 reviews
7.7 GPM at 20 psi and 12.5 GPM at 60 psi. To be used with 23159 Rod and 23160 Float Ball (sold separately).3/8inch MPT PVC Tank Mount Float Valve with .25inch Orifice.



Viewing Page 1 of 5

View more products in Valves.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - scrantonsewer.org. All Rights Reserved.