Browse Our Catalog

Flow Switches - Page 4 - Extreame Savings! Save up to 45%


Extreame Savings! Up to 45% off on Flow Switches at Scranton Sewer, Page 4. Top brands include Doyon, W.E. Anderson®, Mcdonnell & Miller, Gems Sensors, Warrick, & Dwyer. Hurry! Limited time offers. Offers valid only while supplies last.



Doyon QUF350 Stainless Steel Electric Float
By Doyon
In Stock
$155.00
$131.99
You Save: 15%

mpn: QUF350, ean: 0220215039422,

4.8 out of 5 stars with 20 reviews
Doyon Quf350 Stainless Steel Electric Float.Genuine OEM replacement part. Doyon equipment inc has been a manufacturer of bakery and pizza ovens for more than 50 years. Use genuine OEM parts for safety reliability and performance.


W.E. Anderson FLOTECT Vane Operated Flow Switch, V4-2-U, Brass Body, Universal Vane
By W.E. Anderson®
In Stock
$313.90

mpn: V4-2-U,

4.0 out of 5 stars with 251 reviews
Rugged and reliable the Series V4 Flotect® flow switch operates automatically to protect equipment and pipeline systems against damage from reduction or loss of flow. The V4 is time tested being installed in thousands of pipelines and processing plants around the world. A unique magnetically actuated switching design gives superior performance. There are no bellows, springs, or seals to fail. Instead, a free-swinging vane attracts a magnet within the solid metal switch body, actuating a snap


FS8-W 1 NPT Flow Switch
By Mcdonnell & Miller
In Stock
$224.83

mpn: MM FS8-W, ean: 0734016497416,

4.1 out of 5 stars with 95 reviews
Part Number: MM FS8-W Part: General Purpose Flow Switch 1In NPT SPDT Nema 4X # 120601 -1 Size (In)1 Size (In).


Gems Sensors 41705 Intrinsically Safe-Pak Relay, 100 to 135 VAC Voltage, 0.3A Current
By Gems Sensors
In Stock
$305.42
$290.15
You Save: 5%

mpn: 41705,

4.4 out of 5 stars with 22 reviews
Gems intrinsically safe-pak relay. Intrinsically safe protection. 100 to 135 VAC operating voltage. 25 K turn-on sensitivity (ohms). 1M turn-off sensitivity (ohms). 0.3 Amps load current. 6 ma at 120VAC output leakage current. 100 to 135 VAC load voltage. 120 degree F maximum temperature. Approvals: UL, FM, CSA.Intrinsically safe-pak relay. 100 to 135 VAC operating voltage. 100 to 135 VAC load voltage. 120 degree F maximum temperature. Approvals: UL, FM, CSA.


Warrick 26MC1A0 General Purpose Low Water Cutoff Plug-In Module with 11 Pin Octal Socket, 26K ohms Direct Sensitivity, 120 VAC Voltage
By Warrick
In Stock
$207.00
$202.35
You Save: 2%

mpn: 26MC1A0,

4.9 out of 5 stars with 52 reviews
Gems Series 26M is designed for low-water cutoff protection. This control meets CSD1 requirements for boiler low water cutoff. Series 26M features powered contacts. Modular plug-in design. Low voltage sensor. 11-Pin Socket. Solid state reliability. LED Monitoring. U.L. ''Limit Control''. Applicable for low-water cutoff, point level, alarms. 26K ohms direct sensitivity. 120 VAC voltage.Modular plug-in design. Solid state reliability. Low voltage sensor. LED monitoring; powered contacts. Designed


Warrick 16DMC1A0 DPDT Load Contact Solid State Plug-In Module with 11 Pin Octal Socket, 26K ohms Direct Sensitivity, 120 VAC Voltage
By Warrick
In Stock
$274.00

mpn: 16DMC1A0,

4.9 out of 5 stars with 185 reviews
Gems solid state plug-in module with DPDT load contacts. Eliminates the need for slave relays. 11 pin octal plugs. Requires little panel space. General purpose single level or differential applications. U.L. listed. Applications include single level service, differential service, point level, alarms, valve control and pump control. 26K ohms direct sensitivity. 120 VAC voltage.Modular plug-in design. Solid state reliability. Low voltage sensor. LED monitoring; compact size. New microprocessor


Warrick 3E3C 316 Stainless Steel Liquid Level Sensor with Three Probe, 2" NPT Male
By Warrick
In Stock
$515.00
$281.22
You Save: 45%

mpn: 3E3C,

4.3 out of 5 stars with 41 reviews
Gems Warrick liquid level sensors are available in three probe models. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. It includes food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. These Warrick fitting are designed for OEM use. Series 3E fittings are cast metal, pressure-tight assemblies capable of handling 3 probes. Attachment to vessels is accomplished


Gems Sensors 194471 Nickel Plated Steel Single Point Electro-Optic Level Switch with Wet Probe, 1/2" NPT Male, 12 VDC, Normally Open
By Gems Sensors
In Stock
$140.00
$130.68
You Save: 7%

mpn: 194471, ean: 0013227065172,

4.6 out of 5 stars with 278 reviews
Gems electro-optic level switches maintain the top-performing environmental capabilities of their larger family members while featuring an overall size that is 50 percent smaller. At just 1.38'' long, ELS-1150 represents the smallest electro-optic level sensor in its performance class, and by far the most economical. ELS-1150 switches utilize a strong, glass prism fused to a carbon steel housing to easily monitor vessels pressurized up to 2500 psi. Their compact package size makes them the


Gems Sensors 142700 Polysulfone General Purpose Single Point Electo-Optic Level Switch with Wet Probe, 1/4" NPT Male, 10-28 VDC Current, Normally Open
By Gems Sensors
In Stock
$108.00
$105.45
You Save: 2%

mpn: 142700,

4.7 out of 5 stars with 125 reviews
Gems polysulfone units are both compact and economical. They feature a variety of mountings, power requirements and electrical terminations to make it easy to find a perfect match. Current consumption: 18 mA, approximately. Output: TTL/CMOS compatible. Open collector output may sink 40 mA UP TO 30 VDC. Repeatability: +/-1mm. EMI susceptibility: Meets (MIL-STD-461B Part 2 Modified) Specification of 10 V/M for Frequency Range 30 to 1000 MHz (Except 609 MHz = 9 V/M and 679 MHz = 7.5 V/M). UL


Gems Sensors 181291 316 Stainless Steel Float Small Size Single Point Level Switch, 5/8" Diameter, 1/2" NPT Male
By Gems Sensors
In Stock
$147.00
$143.45
You Save: 2%

mpn: 181291,

4.8 out of 5 stars with 13 reviews
Gems float small size single point level switch. This low-cost unit are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers broad compatibility in water, oils and chemicals. Minimum liquid specific gravity:0.55. Stem material: Polypropylene. Float material: Polypropylene. Float diameter:5/8''. Mounting size: 1/2'' NPT Male. Mounting: horizontal. Switch type: SPDT (10 Watt Minimum). Input: 120VAC. Output:5Amps Relay. Maximum pressure: 100 psi. Minimum


Gems Sensors 30290 316 Stainless Steel Float Single Point Side Mounted Level Switch, 2" Diameter, 1" NPT Male, 1" Actuation Level, 20VA, SPDT
By Gems Sensors
In Stock
$332.00
$324.90
You Save: 2%

mpn: 30290,

4.4 out of 5 stars with 38 reviews
Gems single point level switch. These unit solve the problem of point level sensing in tanks with inaccessible tops or bottoms, or at intermediate locations in larger tanks. Operation is positive and dependable. The float pivots with changing liquid level, displacing a shuttle which magnetically actuates a hermetically sealed switch within the unit. Installation is through the tank side at the detection point. Ultimate strength: for pressures to 900 PSIG and temperatures to 300 degree F.


Gems Sensors 79990 316 Stainless Steel Float Single Point Rugged Compact Alloy Level Switch, 1-1/2" Diameter, 1/8" NPT Male, 5/8" Actuation Level, -40 to 480 Degree F Operating Temperature, Normally Open
By Gems Sensors
In Stock
$114.00
$109.25
You Save: 4%

mpn: 79990, ean: 8903530506429,

4.4 out of 5 stars with 15 reviews
Gems single point level switch. Rugged durability. Broad heat and pressure capabilities. Ideal for shallow tanks or restricted spaces, or for low-cost, high volume use. Stainless steel is generally recognized as safe (GRAS) with FDA for food contact regulations. 0.70 Minimum liquid SG. Operating temperature is -40 to 480 degree F. 100 psi maximum pressure. 20 VA switch. Electrical termination: Teflon lead wires. U.L. Recognized - File No. E45168 and CSA Listed - File No. 30200.Rugged


General Purpose Flow Switch, NEMA4
By Mcdonnell & Miller
In Stock
$161.85
$152.04
You Save: 6%

mpn: FS254,

4.9 out of 5 stars with 45 reviews
'General Purpose Switch, Min. Flow Rate 5.8 GPM, Max. Flow GPM 131, Connection Size (In.) 1 NPT, Switch Enclosure NEMA4, Min. Ambient Temp. 32 F, Min. Fluid Temp. 30 F, Max. Fluid Temp. 250 F, Max. Pressure 160 PSI, Operating Velocity Range 130 - 280 FPM, Switch Type Single Pole Double Throw Snap Switch, Contact Rating 7.4A @ 120 VAC - Full Load, 120 VA @ 120 or 240 VAC - Pilot Duty, Body Material Brass, Material of Construction Brass, Stainless Steel, EPDM, Voltage 120/240'Price For: Each


Gems Sensors RFS Series Brass Flow Sensor Switch, Inline, Rotor Type, 24 VDC Input, 0.1 - 5.0 gpm Flow Setting Adjustment Range, 1/4" NPT Female
By Gems Sensors
In Stock
$283.00

mpn: 156265,

4.6 out of 5 stars with 205 reviews
Flow Set Point Switching - RFS Types. Combines visual confirmation of flow with dynamic, electronic switch operation. Easy, adjustable switch point calibration: a local LED signals when set point is reached. RotorFlow Switches build an extra level of reliability and protection into your equipment. By principle of operation, the rotor cannot be deceived into indicating a positive flow situation when no flow actually exists. Once set to a desired actuation point, RotorFlow will switch to a


Gems Sensors FS-10798 Series Brass Flow Switch For Use With Oil, Inline, Piston Type, With 1/2" Conduit Connector, 0.50 - 20 gpm Flow Setting Adjustment Range, 1/2" NPT Female
By Gems Sensors
In Stock
$412.00
$405.56
You Save: 2%

mpn: 49073,

4.9 out of 5 stars with 105 reviews
FS-10798 Series - Externally Adjustable for Water, Oils and Gases. These externally adjustable switches are ideal for protecting machine tools from coolant flow failure, for protecting bearings from loss of lubricant or to assure proper air flow. They offer an infinite number of flow settings at pressures up to 1000 PSIG, with low pressure drop and precise repeatability. The adjusting vane is easily field adjustable using an ordinary flat-bladed screwdriver. The adjustment is set-screw-locked


Gems Sensors FS-550 Series Stainless Steel 316 High Pressure Flow Switch, Paddle Type, 5.0 - 29.0 gpm Flow Setting Adjustment Range, 1" NPT Male
By Gems Sensors
In Stock
$121.42

mpn: 30640,

4.1 out of 5 stars with 234 reviews
FS-550 Series - High Pressure, Metal Paddle Switch. Standard FS-550 switches sense liquid flow in either direction to monitor flow/no-flow conditions. They are supplied in two paddle lengths. The paddle is trimmed during installation to permit switch actuation at the desired flow rate. As flow increases in a pipe, the paddle of the switch pivots to move out of the liquid path, producing less than 3 PSIG of pressure drop regardless of pipe size.Wetted Materials: 316 Stainless Steel, Teflon,


Gems Sensors FS-925 Series Brass Flow Switch, Inline, Piston Type, 0.1 gpm Flow Setting, 1/4" NPT Female
By Gems Sensors
In Stock
$193.00

mpn: 26914,

4.1 out of 5 stars with 160 reviews
FS-925 Series - General Purpose. These two series of precision-calibrated switches provides reliable and consistent performance; repeatability is within 1%. FS-925 and FS-926 units are factory preset for actuation at specified flow rates. These switches provide accurate detection of excessive or insufficient flow rates in such applications as: protecting against loss of fluid flow in hydraulic systems, assuring proper coolant flow in semiconductor processing equipment, monitoring high pressure


W.E. Anderson® FLOTECT® Vane Operated Flow Switch, V4-SS-2-U, SS Body, Universal Vane
By W.E. Anderson®
In Stock
$442.90

mpn: V4-SS-2-U,

4.9 out of 5 stars with 215 reviews
Rugged and reliable the Series V4 Flotect® flow switch operates automatically to protect equipment and pipeline systems against damage from reduction or loss of flow. The V4 is time tested being installed in thousands of pipelines and processing plants around the world. A unique magnetically actuated switching design gives superior performance. There are no bellows, springs, or seals to fail. Instead, a free-swinging vane attracts a magnet within the solid metal switch body, actuating a snap


Dwyer Flotect Series V10 Mini-Size Flow Switch, 303 Stainless Steel Housing, Normally Open or Closed, Pressure Range 0-2000 psig, 1/2'' Male NPT
By Dwyer
In Stock
$120.11

mpn: V10SS,

4.1 out of 5 stars with 254 reviews
Designed to provide an inexpensive, reliable unit to monitor the presence or absence of flow in a system. The V10 flow switch is used to monitor unattended equipment and protect it from costly damage. The V10 flow switch utilizes a rugged, hermetically sealed reed switch which is encapsulated in a polypropylene switch housing that fits into a standard heavy duty leak proof brass body or optional 303 Stainless Steel body. The switch adjustment allows the user to change the switch to Normally


Gems Sensors 25872 Intrinsically Safe-Pak Relay, 100 to 135 VAC Voltage, 5A Current
By Gems Sensors
In Stock
$280.00

mpn: 25872,

4.5 out of 5 stars with 23 reviews
Gems intrinsically Safe-Pak electronic relay. Less than 100 microamps at 9 VDC actuates the unit to control loads to 5A at 120 VAC. Resistive up to 100000 ohm or short-circuiting sensors operate the unit. Operating temperature range: 0 to +120 degree F. 5A load current maximum. 400 K Turn-on sensitivity (typical). 1 M turn-off sensitivity (typical). 2 VAC voltage loss. Maximum output leakage current: 6 mA at 120 VAC. SPST N.O. switching operation. Approvals: UL, FM, CSA. 3'' height.



Viewing Page 4 of 10

View more products in Hydraulics, Pneumatics & Plumbing.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - scrantonsewer.org. All Rights Reserved.