Browse Our Catalog

Flow Switches - Page 6 - Blowout Sale! Save up to 65%


Blowout Sale! Up to 65% off on Flow Switches at Scranton Sewer, Page 6. Top brands include Gems Sensors, Johnson Controls, Warrick, Dwyer, TPI, Cimtek, & Gits Manufacturing. Hurry! Limited time offers. Offers valid only while supplies last.



Gems Sensors RFS Series Stainless Steel 316 Flow Sensor Switch, Inline, Rotor Type, 24 VDC Input, 1.5 - 20.0 gpm Flow Setting Adjustment Range, 1/2" NPT Female
By Gems Sensors
In Stock
$344.00

mpn: 165077,

4.5 out of 5 stars with 256 reviews
Flow Set Point Switching - RFS Types. Combines visual confirmation of flow with dynamic, electronic switch operation. Easy, adjustable switch point calibration: a local LED signals when set point is reached. RotorFlow Switches build an extra level of reliability and protection into your equipment. By principle of operation, the rotor cannot be deceived into indicating a positive flow situation when no flow actually exists. Once set to a desired actuation point, RotorFlow will switch to a


Gems Sensors FS-10798 Series Brass Flow Switch For Use With Water, Inline, Piston Type, With 1/2" Conduit Connector, 0.50 - 20 gpm Flow Setting Adjustment Range, 1/2" NPT Female
By Gems Sensors
In Stock
$424.00
$150.00
You Save: 65%

mpn: 25363,

4.5 out of 5 stars with 13 reviews
FS-10798 Series - Externally Adjustable for Water, Oils and Gases. These externally adjustable switches are ideal for protecting machine tools from coolant flow failure, for protecting bearings from loss of lubricant or to assure proper air flow. They offer an infinite number of flow settings at pressures up to 1000 PSIG, with low pressure drop and precise repeatability. The adjusting vane is easily field adjustable using an ordinary flat-bladed screwdriver. The adjustment is set-screw-locked


AUTOMATIC CONTROL; FLOW SWITCH; SPDT; F/ STANDARD
By Johnson Controls
In Stock
$169.95

mpn: F61KB11C,

4.9 out of 5 stars with 237 reviews
Johnson Controls F61KB-11C. Product Description: SPDT FLOW SWITCH 1'' TO 6'' PIPE REPLACED BY F261KAH-V0Brand: Johnson Controls. Product Number: F61KB-11C. Category: HVAC. Free Shipping on this item!.


Gems Sensors FS-380 Series Stainless Steel 316 High Pressure Flow Switch, Inline, Piston Type, 0.15 gpm Flow Setting, 3/8" Compression Fitting
By Gems Sensors
In Stock
$285.52
$284.10

mpn: 212136,

4.4 out of 5 stars with 281 reviews
FS-380 Series - Compact Flow Switch for High Inline Pressures. These rugged inline flow switches use 100 micron filtration and are less susceptible to clogging than other high-pressure inline flow switches. The one-piece magnetic PPS composite piston makes the FS-380 ideal for high-pressure applications such as industrial cleaning equipment. The FS-380 is also an excellent choice for semicon cooling applications where simple design and reliable operation are required.Wetted Materials: PPS


Warrick 3E1C 316 Stainless Steel Liquid Level Sensor with Single Probe, 1" NPT Male
By Warrick
In Stock
$386.00
$384.67

mpn: 3E1C,

4.5 out of 5 stars with 77 reviews
Gems Warrick liquid level sensors are available in single probe models. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. It includes food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. These Warrick fitting are designed for OEM use. Series 3E fittings are cast metal, pressure-tight assemblies capable of handling 1 probes. Attachment to vessels is accomplished


Gems Sensors 15208 Buna N Float Large Size Single Point Level Switch, 1.145" Diameter, 7/8" Actuation Level, 20VA, SPST/Normally Open
By Gems Sensors
In Stock
$235.00
$234.65

mpn: 15208,

4.1 out of 5 stars with 63 reviews
Gems large size single point level switch. LS-1800 Series is a step above our plastic units for pressure capability. Excellent stability for general use in oils and water Switch operation: Normally open (non-reversible) Minimum liquid specific gravity: 0.85. Stem material: Brass. Float material: Buna. Float diameter: 1.145''. Bracket mounting size. Mounting: Vertical. Switch type: SPST (20 VA). Maximum pressure: 10 psi. Minimum temperature: -40 degree F. Maximum temperature: 230 degree F.


Gems Sensors 57144 Buna N Float Single Point Temperature Level Switch, 1-1/4" Diameter, 1/4" NPT Male, 1-1/2" Actuation Level, 20VA, SPST/Normally Open
By Gems Sensors
In Stock
$102.00

mpn: 57144,

4.6 out of 5 stars with 250 reviews
Gems single point level switch. Level monitoring and temperature switch in a single unit. Intermediate in size. These units are ideal for use in oils and water. Single-setting temperature sensor is in bottom of stem. Brass steam and mounting. 0.75 Minimum liquid SG. Operating temperature up to 180 degree F for water and -40 to 230 degree F for oil. 150 psi maximum pressure. 20 VA normally open switch close on 150 degree F. Beryllium copper, hysol other wetted material. UL Recognized, CSA


Gems Sensors FS-480 Series Stainless Steel 316 Flow Switch with Low Pressure Drop, Inline, Piston Type, 0.5 gpm Flow Setting, 1/2" NPT Male
By Gems Sensors
In Stock
$303.00

mpn: 206915,

4.6 out of 5 stars with 62 reviews
FS-480 Series - Stainless Steel Flow Switch for Large Flow, Low Pressure Drop. The FS-480 large-body inline flow switch delivers ample flow rates with minimal pressure drop. 25% larger than its FS-380 sibling, the FS-480 is ideal for processes that push more fluid through their systems and demand low pressure drops. Designed to accommodate the Semiconductor Industry’s move to larger 300 mm wafer and cross-over equipment, this switch is also perfect for critical medical equipment applications.


Gems Sensors FS-4 Series Ryton Flow Switch, Elbow, Piston Type, SPDT Switch, 0.1 gpm Flow Setting, 9/16"-18 UNF-2B
By Gems Sensors
In Stock
$107.00
$104.50
You Save: 2%

mpn: 122352,

4.6 out of 5 stars with 164 reviews
FS-4 Series - Low Cost, Molded Plastic Construction. The FS-4 Series makes flow protection economical for a broad range of industrial applications such as welders, lubrication systems, medical sterilizers and laundry chemicals dispensing.Wetted Materials: Ryton, 316 Stainless Steel, Viton, Epoxy. Electrical Termination: 18 AWG, Zipcord, 24'' long. Switch Type: SPDT (20VA). Set Point Differential (Maximum): 0.2. Recommended Filtration: 50 micron.


Gems Sensors 38760 Buna N Float Large Size Single Point Cushioned Float Level Switch, 1-7/8" Diameter, 1/4" NPT Male, 1-1/4" Actuation Level, 20VA, SPST/Normally Close
By Gems Sensors
In Stock
$118.00
$117.80

mpn: 38760,

4.7 out of 5 stars with 270 reviews
Gems single point level switch. Cushioned float and switch for turbulent liquids or excessive vibration. Easily grounded. These units are ideal for use in oils and water. Ideal for tank trucks, construction equipment or mobile applications. Aluminum steam and mounting. 0.55 Minimum liquid SG. Operating temperature -40 to 180 degree F. 150 psi maximum pressure. 20 VA normally close switch. Stainless steel, hysol other wetted material.Cushioned float and switch for turbulent liquids or excessive


Gems Sensors 117712 316 Stainless Steel Float Single Point Bent Stem Level Switch, 1-1/2" Diameter, 1/8" NPT Male, 2" Actuation Level, SPST/Normally Open
By Gems Sensors
In Stock
$112.00

mpn: 117712,

4.1 out of 5 stars with 174 reviews
Gems single point level switch. Bent stem switches provide greatest buoyancy of any side mount version. These units perform in liquids with specific gravities as low as 0.45. switches protrude into tank less than 3 inches. UL Recognized. Float stop is berylium copper or PH-15-7-MO stainless steel. 20-240 VAC. Switch is normally open (dry). Vertical +/- 30 degrees mounting attitude. 0.70 minimum liquid SG. -40 to 300 degree F operating temperature. 100 psi maximum pressure.Bent stem switches


Gems Sensors 117716 316 Stainless Steel Float Single Point Bent Stem Level Switch, 1-1/2" Diameter, 3/8"-24 Thread, 2" Actuation Level, SPST/Normally Open
By Gems Sensors
In Stock
$121.38

mpn: 117716,

4.5 out of 5 stars with 287 reviews
Gems single point level switch. Bent stem switches provide greatest buoyancy of any side mount version. These units perform in liquids with specific gravities as low as 0.45. switches protrude into tank less than 3 inches. UL Recognized. Float stop is berylium copper or PH-15-7-MO stainless steel. 20-240 VAC. Switch is normally open (dry). Vertical +/- 30 degrees mounting attitude. 0.70 minimum liquid SG. -40 to 300 degree F operating temperature. 100 psi maximum pressure.Bent stem switches


Gems Sensors FS-380 Series Stainless Steel 316 High Pressure Flow Switch, Inline, Piston Type, 0.5 gpm Flow Setting, 3/8" Compression Fitting
By Gems Sensors
In Stock
$288.00

mpn: 177593,

4.7 out of 5 stars with 168 reviews
FS-380 Series - Compact Flow Switch for High Inline Pressures. These rugged inline flow switches use 100 micron filtration and are less susceptible to clogging than other high-pressure inline flow switches. The one-piece magnetic PPS composite piston makes the FS-380 ideal for high-pressure applications such as industrial cleaning equipment. The FS-380 is also an excellent choice for semicon cooling applications where simple design and reliable operation are required.Wetted Materials: PPS


Gems Sensors FS-380 Series Stainless Steel 316 High Pressure Flow Switch, Inline, Piston Type, 0.25 gpm Flow Setting, 3/8" NPT Male
By Gems Sensors
In Stock
$287.00
$110.55
You Save: 61%

mpn: 179992,

4.5 out of 5 stars with 42 reviews
FS-380 Series – Compact Flow Switch for High Inline Pressures. These rugged inline flow switches use 100 micron filtration and are less susceptible to clogging than other high-pressure inline flow switches. The one-piece magnetic PPS composite piston makes the FS-380 ideal for high-pressure applications such as industrial cleaning equipment. The FS-380 is also an excellent choice for semicon cooling applications where simple design and reliable operation are required.Wetted Materials: PPS


Dwyer WE Anderson Series FS-2 Vane Flow Switch, Paddle, 1" Male NPT, 145 psig Max. Pressure
By Dwyer
In Stock
$58.90

mpn: FS-2,

4.0 out of 5 stars with 54 reviews
The Series Fs-2 Vane Flow Switches Offers An Economical Flow Proving Solution. The Fs-2 Paddles Are Adjustable To Fit 1 To 8'' Size Pipe. Made in United States. Manufactured by Dwyer Instruments.Low Cost. Field Adjustable Set Point And Paddle. Sold As Each.


TPI RH3A Series RH Adjustable Air Flow / Differential Pressure Switch Control, 0.05" - 12" WC, Compression Connection
By TPI
In Stock
$43.80
$36.78
You Save: 16%

mpn: RH3A, ean: 0686334546317,

4.0 out of 5 stars with 15 reviews
Air flow / differential pressure switch, adjustable pressure set, conduit connection- compression (both sides), voltage rating- 120 to 277 vac, setpoint range- 05 to 12 in wc.RH Series. Senses Pressure or Vacuum. Automatic Reset.


Cim-Tek 60002 Locking Pre Vent Cap
By Cimtek
In Stock
$32.92

mpn: 60002, ean: 0662537600025,

4.4 out of 5 stars with 26 reviews
60002 The Cim-Tek Locking Pre-Vent pressure cap is a original patent design for use on small above ground farm tanks, commercial gasoline tanks, distillate tanks, fuel transfer tanks, small oil storage tanks, and industrial oil transfer tanks. The Pre-Vent helps to maintain fuel quality by reducing condensation and evaporation loss. It's designed to divert rain and condensation away from the fill hole.Fits 2'' NPT Opening. Powder Coated Finish. Maintain Fuel Quality.


Gits 1632-025001 Style 1632 Breather Vent, 1/4-18 NPT Breather with Screen Filter
By Gits Manufacturing
In Stock
$15.04

mpn: 1632-025001,

4.7 out of 5 stars with 210 reviews
Designed for rugged industrial applications, these breathers maintain safe, equalized pressure in a unit even when it is being filled or under sudden changes in ambient temperature. Style 1632 has a screen filter.Designed for rugged industrial applications. These breathers maintain safe, equalized pressure in a unit. It is being filled or under sudden changes in ambient temperature. Style 1632 has a screen filter. Zinc plated finish.


Gems Sensors 164520 Polypropylene Float Small Size Type 3 Internal Mounting Single Point Level Switch, 11/16" Diameter
By Gems Sensors
In Stock
$38.00

mpn: 164520, ean: 0013227001293,

4.0 out of 5 stars with 183 reviews
Gems Polypropylene float single point level switch with type 3 internal mounting. Ls-7 series compact side mounts are the solution to many small tanks. These low-cost units are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers broad compatibility in water, oils and chemicals. Switch rating: SPST, 20VA. Lead wire gauge: No. 22 AWG. Mounting attitude: Horizontal. Switch operation: Depending on the mounting position, the float on these switches can rise


Gems Sensors 224504 Polysulfone Float Rugged Electro-Optic Single Point Level Switch with 6" Lead Wire Length, 1/4" NPT Male, 5V DC, Wet
By Gems Sensors
In Stock
$71.61

mpn: 224504,

4.4 out of 5 stars with 150 reviews
The represents Gems smallest electro-optic level sensors developed to monitor a broad range of media including OHV type fluids. UL approved design features a TPE over-molded electronics insert, TPE insulated wires, and fluorocarbon O-ring seals that create a watertight, environmentally resistant assembly, ideally suited for use in harsh environments. This series offer excellent temperature and pressure capabilities. With its brass housing and fused glass prism. Leak detection for drip pans.



Viewing Page 6 of 10

View more products in Hydraulics, Pneumatics & Plumbing.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - scrantonsewer.org. All Rights Reserved.