Browse Our Catalog

Flow Switches - Page 9 - Huge Savings! Save up to 20%


Huge Savings! Up to 20% off on Flow Switches at Scranton Sewer, Page 9. Top brands include Antunes Controls, Gits Manufacturing, Gems Sensors, Gems, Madison, Dwyer, & Pentair. Hurry! Limited time offers. Offers valid only while supplies last.



SMD Air Flow Switch
By Antunes Controls
In Stock
$50.21
$45.81
You Save: 9%

mpn: 8024204107,

4.2 out of 5 stars with 32 reviews
' SMD Air Flow Switch, Fits Brand ANTUNES CONTROLS 'Price For: Each Fits Brand: ANTUNES CONTROLS Item: SMD Air Flow Switch Country of Origin (subject to change): United States.


Gits 1631-050001 Style 1631 Breather Vent, 1/2-14 NPT Open Breather
By Gits Manufacturing
In Stock
$16.75

mpn: 1631-050001,

4.9 out of 5 stars with 251 reviews
Designed for rugged industrial applications, these breathers maintain safe, equalized pressure in a unit even when it is being filled or under sudden changes in ambient temperature. Style 1631, having no air filter, permits straight-through flow of air.Designed for rugged industrial applications. These breathers maintain safe, equalized pressure in a unit. It is being filled or under sudden changes in ambient temperature. Style 1631, having no air filter, permits straight-through flow of air.


Gems Sensors 165570 Nylon Float Small Size Type 3 Internal Mounting Single Point Level Switch, 11/16" Diameter
By Gems Sensors
In Stock
$38.00

mpn: 165570, ean: 0013227001316,

4.7 out of 5 stars with 269 reviews
Gems Nylon float single point level switch with type 3 internal mounting. Ls-7 series compact side mounts are the solution to many small tanks. These low-cost units are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers broad compatibility in water, oils and chemicals. Switch rating: SPST, 20VA. Lead wire gauge: No. 22 AWG. Mounting attitude: Horizontal. Switch operation: Depending on the mounting position, the float on these switches can rise or lower


Gits 00801 Oil Hole Covers and Cup, Style Y Elbow, 1/8"- 27 Male NPT, 15/16 Overall Height, 1-19/32 Assembly Clearance
By Gits Manufacturing
In Stock
$19.33
$18.98
You Save: 2%

mpn: 00801,

4.9 out of 5 stars with 15 reviews
Style Y oil cups represent quality at low cost. Oiler bodies are drawn from cold rolled strip. Shanks are machined from hexagon bar stock. Zinc plated. Shank is secured to oiler body to form a mechanically tight connection; the, joint is thoroughly brazed to further strengthen the connection and make it dependably leak-proof.Style Y oil cups represent quality at low cost. Oiler bodies are drawn from cold rolled strip. Shanks are machined from hexagon bar stock. Shank is secured to oiler body to


Gits 01202 Oil Hole Covers and Cup, Style L Elbow Threaded Oiler, 1/4"- 32 Male UNEF, 19/32 Overall Height, 1-1/16 Assembly Clearance
By Gits Manufacturing
In Stock
$10.18

mpn: 01202,

4.0 out of 5 stars with 195 reviews
Style L oilers are used extensively on motors and small machinery requiring side oiling and extremely low cost. Zinc plated 1-piece die-casting has flat wrench hold on most style L screw-type oilers.Style L oilers are used extensively on motors and small machinery requiring side oiling and extremely low cost. Zinc plated 1-piece die-casting has flat wrench hold on most Style L screw-type oilers. 3/16-inches thread length. 3/4-inches overall length. 19/32-inches overall height.


Gems PS71-30-4MNZ-C-HC Series PS71 General Purpose Mini Pressure Switch, SPDT Circuit, 65-300 psi Range, 1/4" MNPT Steel Fitting, DIN 43650A 9 mm Cable Clamp
By Gems
In Stock
$81.00

mpn: PS71-30-4MNZ-C-HC,

4.1 out of 5 stars with 29 reviews
These versatile general purpose switches with snap action micro switches can be used in a wide range of hydraulic and pneumatic applications. Their proven piston/diaphragm design offers outstanding accuracy over a very wide pressure range with an outstanding 6000 psi proof pressure. Their modular construction allows gems to offer a large number of standard pressure fittings in two materials as well as numerous electrical ratings and terminations. Users can easily configure this 209505 to meet


Gems PS41-10-4MNB-C-FL18 Series PS41 Economical Miniature Pressure Switch, SPDT Circuit, 4-8 psi Range, 1/4" MNPT Brass Fitting, SPDT Circuit, 18" Flying Leads
By Gems
In Stock
$37.00

mpn: PS41-10-4MNB-C-FL18,

4.1 out of 5 stars with 37 reviews
These Miniature pressure switches are designed for demanding applications where space and/or price are strong concerns. The switches utilize a piston/diaphragm design, which incorporates the high proof pressure of piston technology with the sensitivity of diaphragm designs. Switches are field adjustable via an Allen head screw that is hidden to protect against unauthorized tampering.4 to 100 psi (0.28 to 7 bar). 350 psi (24 bar) proof pressure. 700 psi (48 bar) Burst pressure.


Gems Sensors 01750 316 Stainless Steel Float Single Point Rugged Compact Alloy Level Switch, 1-1/2" Diameter, 1/8" NPT Male, 5/8" Actuation Level, -40 to 300 Degree F Operating Temperature, Normally Open
By Gems Sensors
In Stock
$86.00
$77.87
You Save: 9%

mpn: 01750, ean: 0013227004621,

4.0 out of 5 stars with 56 reviews
Gems single point level switch. Rugged durability. Broad heat and pressure capabilities. Ideal for shallow tanks or restricted spaces, or for low-cost, high volume use. Stainless steel is generally recognized as safe (GRAS) with FDA for food contact regulations. 0.70 Minimum liquid SG. Operating temperature is -40 to 300 degree F. 100 psi maximum pressure. 20 VA switch. Electrical termination: No. 22 AWG, 24'' L, polymeric lead wire. U.L. Recognized - File No. E45168 and CSA Listed - File No.


Gems Sensors 224503 Polysulfone Float Rugged Electro-Optic Single Point Level Switch with 6" Lead Wire Length, 1/2"- 20 UNF-2B, 12V DC, Wet
By Gems Sensors
In Stock
$74.00
$59.19
You Save: 20%

mpn: 224503,

4.1 out of 5 stars with 26 reviews
The represents Gems smallest electro-optic level sensors developed to monitor a broad range of media including OHV type fluids. UL approved design features a TPE over-molded electronics insert, TPE insulated wires, and fluorocarbon O-ring seals that create a watertight, environmentally resistant assembly, ideally suited for use in harsh environments. This series offer excellent temperature and pressure capabilities. With its brass housing and fused glass prism. Leak detection for drip pans.


Gems Sensors 26791 PTFE Float Single Point Rugged Compact Alloy Level Switch with 316 Stainless Steel Stem and Mounting, 1" Diameter, 1/8" NPT Male, 3/4" Actuation Level, Normally Open
By Gems Sensors
In Stock
$98.00

mpn: 26791,

4.3 out of 5 stars with 112 reviews
Gems single point level switch. Rugged durability. Broad heat and pressure capabilities. Ideal for shallow tanks or restricted spaces, or for low-cost, high volume use. Offer broad chemical compatibility for general purpose use. Ideal for oils and water. 0.85 Minimum liquid SG. Operating temperature is -40 to 250 degree F. 1000 psi maximum pressure. 20 VA Normally open switch. Electrical termination: No. 22 AWG, 24'' L, polymeric lead wire. U.L. Recognized - File No. E45168 and CSA Listed -


Gems Sensors 3R3C0 316 Stainless Steel General Purpose Probe, 1/4" NPT Male, 3' Length
By Gems Sensors
In Stock
$46.00

mpn: 3R3C0,

4.8 out of 5 stars with 56 reviews
Gems probes are metallic rods with threaded ends that screw into a fitting that extends vertically down into the liquid. Series 3R: 1/4'' (0.64 cm) threaded rod. 3' probe length. 1/4'' NPT male.Series 3R probes are metallic rods with threaded end. For general purpose use. 316 stainless steel for different applications. For use with Series 3E, 3F, 3G, 3B fittings. 1/4'' (0.64 cm) threaded rod.


Gits 04043 BW-10 Porthole Gauge with Open Back , 1 ~ 11-1/2
By Gits Manufacturing
In Stock
$13.46

mpn: 04043,

4.7 out of 5 stars with 158 reviews
Designed for multiple use, these gauges are made for insertion in tapped els, tees or other NPT fittings and are easily installed and removed with a wrench. Recommended maximum pressures listed for style BW-10 allow safe margins for variations in application and installation. Maximum recommended temperature is 250 degree F not for air service. Turned from solid hexagon rod, this rugged unit comes factory assembled with clear glass window firmly held between two gaskets by rolled edge of body.


Madison MSB8800 Plastic Bracket Mounted Full Size Liquid Level Switch, 60 VA SPST, 100 psig Pressure
By Madison
In Stock
$92.59
$80.51
You Save: 13%

mpn: MSB8800,

4.5 out of 5 stars with 44 reviews
Liquid level switch has a polypropylene stem and a polypropylene float. Polypropylene is typically suitable for use with acidic liquids such as those found in electroplating and metal cleaning. It is also a great option for lower temperature food operations (up to 105 degrees C) since Madison only incorporates polypropylene that is FDA approved for food contact. This material is a good choice for commercial appliances and equipment as well. The MSB8800 ships with an extra long 6 foot


Gems Sensors FS-400P Series PVC Flow Switch, Elbow, Shuttle Type, 0.5 gpm Flow Setting, 1/2" NPT Female
By Gems Sensors
In Stock
$83.00

mpn: 135805,

4.6 out of 5 stars with 113 reviews
FS-400P Series – Low Cost Units for Plastic Piping. Designed for low cost flow/no-flow monitoring. This series is available with a clear transparent PVC housing which is ideal for use where visual flow confirmation is desirable. These corrosion-resistant switches offer broad chemical compatibility. With only one moving part, their rugged construction offers long life with minimum maintenance. Ideal for water heating or purification, equipment cooling and general chemical processing use.Wetted


Dwyer Flow Switch, P2-15, For Gases, 0.42 CFM (11.9 LPM) Actuation Set Point
By Dwyer
In Stock
$83.90

mpn: P2-15,

4.1 out of 5 stars with 26 reviews
The compact Series P2 Flow Switch utilizes a piston-type design for both air and pure water applications. The switches have preset actuation points from 0.05 to 1.0 GPM for water and 25 CFH to 5 CFM for air. The piston design incorporates a hermetically sealed SPST magnetic reed switch. The P2 is comprised of PPE & PS (polyphenylene ether and polystyrene) housing and piston and 316 Stainless Steel spring and stop pin. All wetted parts are FDA compliant. Economical and superior design make this


Gits 01206 Oil Hole Covers and Cup, Style L Elbow Threaded Oiler, 3/8"- 24 Male UNF, 25/32 Overall Height, 1-5/16 Assembly Clearance
By Gits Manufacturing
In Stock
$18.69

mpn: 01206,

4.7 out of 5 stars with 257 reviews
Style L oilers are used extensively on motors and small machinery requiring side oiling and extremely low cost. Zinc plated 1-piece die-casting has flat wrench hold on most style L screw-type oilers.Style L oilers are used extensively on motors and small machinery requiring side oiling and extremely low cost. Zinc plated 1-piece die-casting has flat wrench hold on most Style L screw-type oilers. 1/4-inches thread length. 1-3/32-inches overall length. 25/32-inches overall height.


Gits 00803 Oil Hole Covers and Cup, Style Y Elbow, 1/8"- 27 Male NPT, 1-7/16 Overall Height, 2-5/8 Assembly Clearance
By Gits Manufacturing
In Stock
$22.33

mpn: 00803,

4.2 out of 5 stars with 19 reviews
Style Y oil cups represent quality at low cost. Oiler bodies are drawn from cold rolled strip. Shanks are machined from hexagon bar stock. Zinc plated. Shank is secured to oiler body to form a mechanically tight connection; the, joint is thoroughly brazed to further strengthen the connection and make it dependably leak-proof.Style Y oil cups represent quality at low cost. Oiler bodies are drawn from cold rolled strip. Shanks are machined from hexagon bar stock. Shank is secured to oiler body to


Gits 1656-200804 2" NPS New Style Low Profile Pressure/Vacuum Vent
By Gits Manufacturing
In Stock
$30.54
$30.48

mpn: 1656-200804,

4.4 out of 5 stars with 282 reviews
HFV relief vents from Gits Manufacturing provide high volume pressure/vacuum relief with accurate release pressures. Relief vents are designed to protect storage tanks from over pressure and allow product discharge without manually opening a cover. Patented designs incorporate a unique seal that allows the tank to maintain a positive pressure below the set pressure thereby protecting the tank contents from contamination. An all new design maximizes the flow-through for vacuum relief while


Gits 1631-037001 Style 1631 Breather Vent, 3/8-18 NPT Open Breather
By Gits Manufacturing
In Stock
$12.71
$12.61

mpn: 1631-037001,

4.7 out of 5 stars with 175 reviews
Designed for rugged industrial applications, these breathers maintain safe, equalized pressure in a unit even when it is being filled or under sudden changes in ambient temperature. Style 1631, having no air filter, permits straight-through flow of air.Designed for rugged industrial applications. These breathers maintain safe, equalized pressure in a unit. It is being filled or under sudden changes in ambient temperature. Style 1631, having no air filter, permits straight-through flow of air.


Pentair 42001-0061S Electrical System Air Flow Switch
By Pentair
In Stock
$89.99

mpn: 42001-0061S, ean: 0637509159528,

4.3 out of 5 stars with 32 reviews
Fits these machines: Sta-Rite Max-E-Therm SR-200, 333, 400 Elecrical System; Pentair MasterTemp Gas Heater Electrical SystemAir flow switch replacement. Fits Pentair Sta-Rite Max-E-Therm pool and spa heaters electrical system. Also fits Pentair MasterTemp pool and spa heaters electrical systems.



Viewing Page 9 of 10

View more products in Hydraulics, Pneumatics & Plumbing.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - scrantonsewer.org. All Rights Reserved.