Hydraulic Equipment - Page 3 - Extreame Savings! Save up to 47%

Extreame Savings! Up to 47% off on Hydraulic Equipment at Scranton Sewer, Page 3. Top brands include Enerpac, Hand-Evaluation-Sets, HHT, Temco, HYDRAFORE, Bennett Marine, Haldex, ADVANCED CYLINDERS, ATD Tools, Magister Hydraulics, BVA HYDRAULICS, Cross, Little Giant, Dayton, Hydraulic Pump, Buffalo Backflow Test Kit, & Happybuy. Hurry! Limited time offers. Offers valid only while supplies last.

Enerpac RSM-100 10 Ton Low Height Flat Jack Cylinder
By Enerpac
In Stock
You Save: 15%

mpn: RSM100, ean: 0662005302352,

4.7 out of 5 stars with 58 reviews
Compact, flat design for use where other cylinders will not fit. Mounting holes permit easy fixturing, and the CR-400 coupler and dustcap is included on all models. These are hard chrome plated high quality steel plungers. Other Features include grooved plunger ends which require no saddle, and a single acting spring return.Single-acting cylinder for low-clearance hydraulic lifting applications. 10-ton operating capacity. 0.44'' stroke. 10,000-psi maximum operating pressure. Preinstalled 3/8''

Jamar Hydraulic Hand Evaluation Kit - Hand Dynamometer, Pinch Gauge and Finger Goniometer
By Hand-Evaluation-Sets
In Stock

sku: LR-0CO9-UUKG, mpn: 43188-383456,

4.3 out of 5 stars with 56 reviews
For over 40 years Jamar has been the standard tool to measure hand strength.Jamar® Hydraulic Hand Evaluation Kit. Includes one each of:. Jamar Hydraulic Hand Dynamometer, 5030J1. Jamar Hydraulic Pinch Gauge, 7498-05. Jamar 6'' (15 cm) Finger Goniometer, 7507.

HHT IPI Gas Valve (750-501)
In Stock

ean: 0652174702831,

4.0 out of 5 stars with 47 reviews
Quadra-Fire, Heatilator and Heat N Glo IPI Gas Valve Part # 750-501 Original HHT Parts. No Generics Fits many Quadra-Fire, Heatilator and Heat N Glo Fireplaces and Stoves Replacement propane (LP) Dexen gas valve for Hearth & Home gas stoves and fireplaces. This is an IPI gas valve, does not work with DSI, HSI or standing pilot units. Fits the following Heat N Glo Fireplaces: Heat & Glo Gas Fireplaces: COSMO-GXT-IPI COSMO-SXT-IPI ESC-42ST - Pre serial # 0022120860 LCOR-36TRB-IPI LCOR-HVB-IPI

TEMCo HP0004 - Electric Hydraulic Pump Power Pack Unit 2 Stage Double Acting 120v 10k psi 488 cubic in Capacity - 5 YEAR Warranty
By Temco
In Stock

mpn: HP0004,

4.3 out of 5 stars with 70 reviews
NOTE: Does not ship with hydraulic oil. You will need 2.11 gallon of AW-46 hydraulic oil. Type: Electric Hydraulic Pump Action: Double acting Control: Push Button Stop/ Start, Lever Valve Action - Control lever forward: Pump into hose A, Returns to reservoir on hose B / Control lever neutral: Returns to reservoir on hose A and B / Control lever backward: Pump into hose B, Returns to reservoir on hose A Includes Hydraulic Hose: 2X 5ft - Quick Hydraulic Coupler w/ Dust Cap Oil Capacity: 488

Hydraulic Hand Pump 2 speed Power Pack Hose Coupler (10000 psi - 21 in3) B-700C
In Stock

mpn: 27537,

4.3 out of 5 stars with 138 reviews
2 speed Hydraulic hand pump capable of 10000psi with 21 cubic inches. Easy to operate.Max pressure: 10000 psi. Oil capacity 21 in³. Single acting, two speed operation. Oil output at low pressure (in³/cycle): 0.50. Oil output at high pressure (in³/cycle): 0.11.

TEMCo HC0003 - Hollow Hydraulic Cylinder Ram 30 TON 4 In Stroke - 5 YEAR Warranty
By Temco
In Stock

mpn: HC0003,

4.4 out of 5 stars with 266 reviews
TEMCo Industrial's hydraulic cylinders come with an ISO 14540 coupler, which means you're compatible with a large majority of other products out on the market. Don't deal with the headache of mismatched fittings and confusing coupler specifications - have the confidence that you're ready to thread into a TEMCo hydraulic cylinder so you can get back to your project, whether you're a pro at work or a regular Joe. Not using a standard coupler fitting? That's ok, we've included the matching

Bennett Marine 3004.0333 Hydraulic to BOLT Electric Conversion Kit
By Bennett Marine
In Stock

mpn: 3004.0333, ean: 0666285600276,

4.8 out of 5 stars with 156 reviews
All you need for a quick and easy conversion from Bennett hydraulic actuators to Bennettâs BOLT Electric actuators. BOLT actuators are exceptionally durable and dependable, backed by a lifetime limited warranty.Quickly and easily conversion from standard Bennett hydraulic single actuator systems using your existing wiring, rocker switch and trim planes. No rewiring or drilling of new holes required. Plug 'n Play connection to your existing standard Bennett Rocker Switch. Equipped with Auto Tab

Haldex Hydraulic Pump - 16 GPM, 2-Stage, Model# 1001507
By Haldex
In Stock

mpn: 1001507,

4.7 out of 5 stars with 177 reviews
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. Max. PSI: 3,000, Shaft Diameter (in.): 1/2, Shaft Type: Staight keyed, GPM: 16, Stage: 2, Material: Cast iron, Usage: Open center hydraulic systems, Rotations Per Minute: 3,600, Weight (lbs.): 10GPM: 16. Shaft: 1/2in.. Inlet: 1in.. Outlet: 1/2in. NPT. Dimensions:.

Advanced Cylinders WT Weld Cross Tube Hydraulic Cylinder 4" Bore x 14" Stroke x 2" Rod x SAE 8 Port x 3000 PSI
In Stock

mpn: 4014WT,

4.7 out of 5 stars with 277 reviews
Advanced Cylinders WT 3000 PSI Weld Cross Tube Cylinder is ideal for agriculture, transportation, construction, forestry, material handling, oil/gas and any industrial application. This cylinder provides value pricing without sacrificing quality. All cylinders have full pressure test and ensures maximum reliability and performance.Advanced Cylinders Part No: 4014WT. Retracted Length: 24''. Extended Length: 38''. Port Size: SAE 8. Pin Size: 1 1/2''.

20 tons 6" stroke Single Acting Hydraulic Cylinder Lifting Jack Ram YG-20150
In Stock

mpn: YG-20150,

4.6 out of 5 stars with 81 reviews
Single acting hydraulic cylinder with a 20ton lifting capacity with a stroke of 6''.Tonnage=20. Stroke=6''. Oil Capacity(in3)=28.37. Closed height=8.89. Outside Diameter=2.99.

ATD Tools 5800 Porto-Power Set
By ATD Tools
In Stock
You Save: 10%

mpn: 5800, ean: 0663126058005,

4.8 out of 5 stars with 26 reviews
Sets are portable for easy use in shop or on the road. A must for body collision repair use. Designed for applications of pushing, spreading and pressing of vehicle body panels as well as various component parts and assemblies. Includes a variety of attachments. Molded storage case included. Ram Capacity: 4-Ton. Pump Capacity: 8,000 psi. Ram - Closed Height: 11''. Ram - Extended Height: 15-3/4''. Ram Effective Area: 1.0 square inch. Also available in 10-Ton, see ATD-5810.4T PORTA POWER JACK SET

Double Acting Welded Hydraulic Cylinder 1.5" Bore 14" Stroke Cross Tube End
By Magister Hydraulics
In Stock

mpn: WCT 1.5x14, ean: 0857743006321,

4.0 out of 5 stars with 55 reviews
These high quality welded hydraulic cylinders are manufactured in accordance with the needs and standards of the U.S. market. The product created for use in various types of machinery such as construction, transportation, agriculture, and waste. Rigid welded construction, high tensile welded steel end mounts, threaded gland and quality seals allow Magister Hydraulics' cylinders to work in harsh conditions. All cylinders are fully and easily maintainable. Each unit is pressure tested before

BVA Hydraulics P350 Two Speed Aluminum Hand Pump 21 Cubic Inches Reservoir
SKU: #P350
In Stock
You Save: 18%

sku: P350, mpn: P350,

4.4 out of 5 stars with 21 reviews
BVA Hydraulics P350 Two Speed Aluminum Hand Pump 21 Cu In Reservoir. It has 1/4-inch NPTF and is constructed of high strength lightweight aluminum alloy for easy handling.Maximum working pressure 10000 psi/700 bar. All hand pumps function in horizontal and vertical positions. Internal pressure relief value for over load protection. External load release valve for single acting cylinder usage. Large oil capacities to power a wide range of cylinders and tools.

DB 3X20 NPT Hydraulic Cylinder
By Cross
In Stock

mpn: CRO022763,

4.5 out of 5 stars with 34 reviews
DB Series clevis mounted cylinder. Rated to 2500 psi, 4000 shock pressure. Standard cylinders feature o-ring with polyurethane back-ups on piston and double lipped u-cup on rod. Full threaded rod through 1.25 diameter.Cylinder Bore 3''. Cylinder Port Type: NPT(PipeThread). Cylinder Port Size: 1/2'' - 08. Cylidnder Pin Diameter: 1''. Cylnder Stroke: 20'', PSI Rating: 2500, Cylinder Rod Diameter: 1.25'', Cylinder Closed Length: 30.25''.

Enerpac V-152 Relief Valve, 10,000 psi, 3/8" NPTF
By Enerpac
In Stock
You Save: 13%

mpn: V152, ean: 0662005109555,

4.1 out of 5 stars with 53 reviews
This Enerpac V-152 relief valve has an adjustable relief pressure to 10,000 psi, a 3/8'' female NPT threaded inlet connection, and the valve body is painted for corrosion resistance. This relief valve can be adjusted to open between 800 and 10,000 pounds per square inch (psi) using the adjustment handle and locking wing nut, and includes a 3' return line hose kit. This relief valve limits the pressure developed by the pump in a hydraulic circuit and is suitable for use in a variety of

Little Giant 517005 Stainless Steel 580GPH Pump with 6-Feet Cord, Bronze
By Little Giant
In Stock
You Save: 3%

mpn: 517005, ean: 0029753358008,

4.6 out of 5 stars with 92 reviews
These premium stainless steel and bronze pumps provide quiet operation and trouble-free use in freshwater, saltwater, chlorinated or brominated water (3-5ppm). They can also be used in hot water applications up to 110 degree F. Use submerged or in open air below water level for ponds, water gardens, medium to large fountains, water displays, waterfalls, streams and for aeration.6 Foot cord. Quiet operation. Premium stainless steel and bronze construction for longevity. Can be used in hot water

Dayton 3LU83 Direct Drive Blower Motor, Permanent Split Capacitor, 1075 Nameplate RPM, 115 Voltage, 1/2 hp
By Dayton
SKU: #3LU83
In Stock
You Save: 5%

sku: 3LU83, mpn: 3LU83, ean: 0190735291153,

4.9 out of 5 stars with 57 reviews
Designed for furnace blowers and other shaft-mounted fan and blower applications. Direct drive blower motor.Permanent split capacitor. Ul recognition (E37403), csa certification (258501). Includes: kite for 2.5 inch. Application: blowers, fans and air circulators.

110V/60HZ Single Acting Manual Valve Electric Hydraulic Pump 10000PSI GYB-630
By Hydraulic Pump
In Stock

mpn: 230549, ean: 0615311276787,

4.8 out of 5 stars with 8 reviews
Usage: Before using the pump,check the oil tank of the pump,make sure there has enough oil in the oil tank and higher than the oil-window. 1.Open the air-out screw before operating the pump; 2.Inspect the oil pressure by the gauge; 3.Change the hydraulic oil every 18 months; 4.Filter the oil before changing the oil,#10 hydraulic oil is recommended; 5.Handle the pump at 10-50℃; 6.Stop working once the motor is hotter to a higher temperature to protect the whole pump system; 7.Keeping replacing

Buffalo Backflow Preventer Test Kit
By Buffalo Backflow Test Kit
In Stock

mpn: BBI-TK9S, ean: 0636676998701,

4.5 out of 5 stars with 217 reviews
Buffalo Backflow Presenter Test Kits is a certified portable testing device made for testing all RPZ (reduced pressure zone) back flow prevention assemblies, DCVA (double check valve assemblies) and PVB valve assemblies. Home of the 6 year warranty the best in the Back Flow Industry The Buffalo Backflow Preventer Test Kit is ready to use out of the box, with a one year free NIST traceable certification, rugged foam lined carrying case and adapters.Easier to use than the competition. 6 Year

Happybuy Hydraulic Pump Electric Single Acting Manual Valve Hydraulic Pump 10000 PSI Electric Hydraulic Power Unit for Home and Commercial Using (Single Acting Hydraulic Pump)
By Happybuy
In Stock
You Save: 47%

mpn: Happybuy Hydraulic Pump Electric, ean: 0601285890333,

4.6 out of 5 stars with 23 reviews
Hydraulic Pump Electric Single Acting Manual Valve Hydraulic Pump 10000 PSI The pump is equipped with pressure gauge so as to observe the pressure when the pump is working at any time. so that users can observe the work of changes at any time. Item Specifications Function: Single-acting, manual valve Input voltage: 110V 60HZ Motor power: 0.75KW Electric current:3.5A Working pressure: 63MPA High pressure:70Mpa(10000PSI) Low pressure:2Mpa(300PSI) Oil capacity: 8L Rotate speed:1400r/min How to

Viewing Page 3 of 10

View more products in Hydraulics, Pneumatics & Plumbing.
Feel free to Browse Our Catalog.

Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - scrantonsewer.org. All Rights Reserved.