Browse Our Catalog

Pipe Fittings - Super Savings! Save up to 32%


Super Savings! Up to 32% off on Pipe Fittings at Scranton Sewer. Top brands include MBRP, K-Flex, Nordfab, MOCAP, Merit Brass, Smith-Blair, Duolok, John R. Robinson INC., & Anvil International. Hurry! Limited time offers. Offers valid only while supplies last.



MBRP Exhaust FGS017 PRO Series Down Pipe 3 in. Mandrel Bent Tubing w/Cat 304 Stainless Steel PRO Series Down Pipe
By MBRP
In Stock
$356.99

mpn: FGS017, ean: 0882963125453,

4.8 out of 5 stars with 185 reviews
Replace that restrictive factory downpipe with a MBRP direct replacement downpipe for more flow, fuel economy, and better performance. Removal of OEM catalytic converters may be a violation of emissions laws in your jurisdiction. Ensure that the intended use of this product is permitted. Not for sale or use in the state of California.MBRP Exhaust FGS017 PRO Series Down Pipe; 3 in. Mandrel Bent Tubing; w/Cat; 304 Stainless Steel;. Authorized Dealer - 100% Satisfaction Guaranteed. MBRP Exhaust.


K-Flex 801-LRE-100078 Closed Cell Elastomeric Insulation, 90 degree Elbow, 7/8" Nominal Insulation ID, 1" Wall Thickness, Black (Pack of 21)
By K-Flex
In Stock
$120.75

mpn: 801-LRE-100078, ean: 0841007132062,

4.6 out of 5 stars with 32 reviews
K-Flex K-Fit prefabricated fittings are the easiest, most reliable way to insulate pipe fittings. They are produced under controlled conditions in our manufacturing location using an automated process to ensure uniformity, good fit and watertight seams. For pipes greater than 4-inches IPS, fittings are butterfly design. For pipes 4-inches IPS and below, fittings are mitered. Fittings are non-porous, fiber-free, CFC free, and resist mold growth. They are used to retard heat gain and prevent


Nordfab Ducting 3220-0404-104000 QF Branch 30 Degree 4-4-4, 4" dia, Galvanized Steel
By Nordfab
In Stock
$134.75

mpn: 3220-0404-104000,

4.3 out of 5 stars with 162 reviews
All branches priced by large end. Standard 30º Optional 45º. Easy to install.All branches priced by large end. Standard 30º Optional 45º. Easy to install.


HSPN0750RD4 Hex Socket Plug for 3/4-14 NPT Threads, PP Red - MOCAP (qty 400)
By MOCAP
In Stock
$183.12

mpn: HSPN0750RD4-M,

4.4 out of 5 stars with 54 reviews
MOCAP Hex Socket Plugs are designed for use on NPT threads and fittings. The Socket design allows for threads to be protected during low-pressure testing and in-house processing or handling, however these are not intended for permanent applications. Inside Length: 0.61in / Inside Diameter: 0.57in / To Fit NPT: 3/4-14Material: Polypropylene (RED). Designed to Protect Threads from Dirt, Dust and Moisture During Low-Pressure Testing and In-Plant Handling.


Nordfab Ducting 3220-0604-106005 QF Branch 45 Degree 6-4-6, 6" dia, Galvanized Steel
By Nordfab
In Stock
$149.95

mpn: 7631326,

4.1 out of 5 stars with 189 reviews
All branches priced by large end. Standard 30º Optional 45º. Easy to install.All branches priced by large end. Standard 30º Optional 45º. Easy to install.


Nordfab Ducting 3220-0604-104000 QF Branch 30 Degree 6-4-4, 6" dia, Galvanized Steel
By Nordfab
In Stock
$148.95

mpn: 2917458,

4.4 out of 5 stars with 155 reviews
All branches priced by large end. Standard 30º Optional 45º. Easy to install.All branches priced by large end. Standard 30º Optional 45º. Easy to install.


Nordfab Ducting 3220-0806-108000 QF Branch 30 Degree 8-6-8, 8" dia, Galvanized Steel
By Nordfab
In Stock
$162.95

mpn: 5880904,

4.2 out of 5 stars with 240 reviews
All branches priced by large end. Standard 30º Optional 45º. Easy to install.All branches priced by large end. Standard 30º Optional 45º. Easy to install.


Stainless Steel 304/304L Pipe Fitting, Type C MSS Stub End, Butt-Weld, Schedule 10, 12" Pipe Size
By Merit Brass
In Stock
$137.95

mpn: 01428-192,

4.5 out of 5 stars with 266 reviews
The Merit Brass Type C MSS stub end is a schedule 10 stainless steel 304/304L butt-weld pipe fitting designed for use with lap joint or slip on flanges to connect pipes to flat surfaces or to other flanged end connections. The Type C fitting has a short outside fillet radius and a butt-weld, beveled opening for welding pipes together. Made of stainless steel 304L, the lower carbon content of this stub end minimizes harmful carbide precipitation due to welding, ensuring corrosion resistance. It


Smith-Blair Ductile Iron with Stainless Steel 304 Straps Repair Clamp, Service Saddle, Stainless Steel Bolt, 2 Bolts, 10" Pipe Size, 2" IP Outlet
By Smith-Blair
In Stock
$290.09
$285.73
You Save: 2%

mpn: 31500111014000 IP,

4.4 out of 5 stars with 72 reviews
'Repair Clamp, Service Saddle, Material of Construction Ductile Iron with 304 Stainless Steel Straps, Gasket Material Nitrile, Pipe Size 10 In, Outlet Pipe Size 2 In, Outlet Connection IP, Max Pressure 300 PSI, Temp Range -20F to 180F, No of Bolts 2, Bolt Size 5/8 In, Bolt Material Stainless Steel, Standards NSF61, AWWA C800, ASTM A536'Price For: Each Max. Pressure (PSI): 300 Number of Bolts: 2 Bolt Size: 5/8'' Bolt Material: Stainless Steel Material: Ductile Iron with 304 Stainless Steel


Duolok 316SS Reducing Union Tee 3/8'' Tube x 3/8'' Tube x 1/4'' Tube, case of 10 (Swaglok PN: SS-600-3-6-4 Parker PN: 6-6-4 JLZ-SS)
By Duolok
In Stock
$389.00

mpn: ISSD6RUT64,

4.5 out of 5 stars with 123 reviews
A 316 Stainless Steel Reducing Union Tee, 3/8'' Tube Fitting x 3/8'' Tube Fitting x 1/4'' Tube Fitting Duolok Vs. Swagelok ® Comparison Design SSP Duolok tube fittings are designed and manufactured to provide a reliable, leak-proof connection in instrumentation and process tubing systems. The double ferrule design compensates for the variations in tubing materials, hardness, and thickness of the tube wall to provide leak-tight connections in an extensive range of applications. Quality All SSP


Lead Free Brass Pipe Fitting, Union, Class 125, 3" NPT Female
By Merit Brass
In Stock
$126.48
$104.58
You Save: 17%

mpn: XNL187-48,

4.6 out of 5 stars with 8 reviews
The Merit Brass union is a class 125 lead free brass pipe fitting for connecting and extending two male threaded pipes. The union has three pieces and includes a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than couplings. It has NPT threads on both ends for creating tighter seals than straight threads and is made of lead-free brass which is comparable in strength to stainless steel and more corrosion resistant. This class 125 fitting meets


Merit Brass Stainless Steel 316 Ball Valve, Two Piece, Full Port, Lever, 3/4" National Pipe Taper Thread Female (Pack of 8)
By Merit Brass
In Stock
$285.34
$285.03

mpn: KV210FP-12,

4.3 out of 5 stars with 179 reviews
The Merit Brass two-piece full port ball valve is made of stainless steel 316 and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This stainless steel 316 valve, which is higher strength and more corrosion resistant than stainless steel 304, has a lever handle with a vinyl sleeve for manual on/off control. This ball valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum


Duolok 316SS Male Connector 3/16'' Tube x 1/8'' NPT, case of 20 (Swaglok PN: SS-300-1-2; Parker PN: 3MSC2N-316; Hy-Lok PN: CMC 3-2N-S316)
By Duolok
In Stock
$150.00

mpn: ISSD3MC2,

4.8 out of 5 stars with 281 reviews
This 316 Stainless Steel Male Connector 1/8'' NPT D2MC8 Duolok has a Tube O.D. of 3/16'' with a NPT male pipe size of 1/8'' Duolok Vs. Swagelok ® Comparison Design SSP Duolok tube fittings are designed and manufactured to provide a reliable, leak-proof connection in instrumentation and process tubing systems. The double ferrule design compensates for the variations in tubing materials, hardness, and thickness of the tube wall to provide leak-tight connections in an extensive range of


Brass, Tapered Tube Plugs, Small End Dia, .300" Large End Dia .500" (Pack of 50)
By John R. Robinson INC.
In Stock
$304.99

mpn: JRRBT26B.500,

4.7 out of 5 stars with 168 reviews
Tapered Tube Plugs are ideal for sealing leaky tubes in condensers, heat exchangers, and chillers. For best seal insert plugs into clean, dry tubes. ROBINSON recommends the tube plug and tube material be the same or compatible.2.750'' Long. 1/2'' x 15-22 BWG. 5/8'' x 11-14 BWG. For best seal insert plugs into clean, dry tubes. Simply drive a plug into each end of the leaking tube with light hammer blows..


Lead Free Brass Pipe Fitting, Threaded Companion Flange, Class 150, 4" NPT Female
By Merit Brass
In Stock
$258.95

mpn: XNL235-64,

4.6 out of 5 stars with 97 reviews
The Merit Brass flange is a class 150 lead-free brass pipe fitting with female National Pipe Taper (NPT) threads used to join two sections of a piping system. It has NPT threads for creating a tighter seal than straight threads and may require gaskets, which are sold separately. The flange has bolt holes to connect to flat surfaces or other flanges and can also be used to absorb vibrations. Lead-free brass is comparable in strength to stainless steel and more corrosion resistant. This class 150


Anvil 2157 Forged Steel Pipe Fitting, Class 3000, Socket Weld Cap, 3" Female
By Anvil International
In Stock
$111.50

mpn: 0362086407,

4.7 out of 5 stars with 228 reviews
The Anvil 2157 class 3000 cap pipe fitting is made of forged steel and has a socket-weld connection. This cap fitting covers the outside of a pipe or fitting to close and terminate its end. It has a female socket-weld end with an internal shoulder for connecting to an unthreaded pipe end. The joined pieces are welded together to create a tight seal against leaks. This fitting is made of steel for weldability and rust resistance and is forged to increase the material's strength and resistance to


Merit Brass K403-12 Stainless Steel 304 Cast Pipe Fitting, 90 Degree Street Elbow, Class 150, 3/4" NPT Male x Female (Pack of 25)
By Merit Brass
In Stock
$121.39
$83.03
You Save: 32%

mpn: K403-12,

4.9 out of 5 stars with 29 reviews
The Merit Brass 90-degree street elbow is a class 150 stainless steel 304 cast pipe fitting with male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for changing flow direction between two pipes. Made of stainless steel 304 to ensure higher corrosion resistance than 302 grade steel, this class 150 fitting meets standards ANSI B1.20.1 and ISO 49 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it


Stainless Steel 304/304L Plate Pipe Fitting, Flange, Blind, Class 150, 6" Pipe Size
By Merit Brass
In Stock
$123.20

mpn: AC460BL-96,

4.1 out of 5 stars with 273 reviews
The Merit Brass plate blind plate flange is a class 150 stainless steel 304/304L pipe fitting used to cover or close the end of a pipe in a piping system. This blind plate flange has bolt holes to connect to flat surfaces for easier installation and disassembly than welded flanges. Made of stainless steel 304L, the lower carbon content of this pipe fitting ensures corrosion resistance. The flange has bolt holes to connect to flat surfaces or other flanges and can also be used to absorb


Merit Brass 618B-08 Stainless Steel 316 Pipe Fitting, Hex Countersunk Plug, Class 1000, 1/2" NPT Male (Pack of 25)
By Merit Brass
In Stock
$135.53
$104.25
You Save: 23%

mpn: 618B-08, ean: 0696738272248,

4.9 out of 5 stars with 40 reviews
The Merit Brass hex countersunk plug is a class 1000 stainless steel 316 cast pipe fitting with male National Pipe Taper (NPT) threads for closing the end of a pipe. This countersunk plug has a recessed hex head for increased leverage with a wrench during installation and disassembly. It inserts into female pipes or fittings and connects with NPT threads, which create a tighter seal than straight threads. The plug is made from stainless steel 316, which is higher strength and more corrosion


Stainless Steel 316/316L Pipe Fitting, Flange, Blind, Class 150, 5" Pipe Size
By Merit Brass
In Stock
$140.95

mpn: ac635bl-80,

4.2 out of 5 stars with 11 reviews
The Merit Brass blind flange is a class 150 stainless steel 316/316L pipe fitting used to close the end of pipes, valves, or equipment nozzles. The flange has bolt holes to connect to flat surfaces or other flanges and can also be used to absorb vibrations. Made of stainless steel 316L, the lower carbon content of this fitting resists corrosion. It meets steel 316 strength standards, 316L extra-low carbon standards, and specifications ASTM A182 and ASME SA182 for quality assurance. Class is a



Viewing Page 1 of 12

View more products in Fittings.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - scrantonsewer.org. All Rights Reserved.