Browse Our Catalog

Pipe Fittings - Page 5 - On Sale Now! Save up to 7%


On Sale! Up to 7% off on Pipe Fittings at Scranton Sewer, Page 5. Top brands include Spears Manufacturing, Palmer's, GF Signet, Dixon Valve & Coupling, Legines, Merit Brass, Parker Hannifin, K-Flex, PRM, & Flair-It Plus. Hurry! Limited time offers. Offers valid only while supplies last.



Spears 867V-CSR Series CPVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 4'' IPS OD x 3'' NPT Female
Spears 867V-CSR Series CPVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 4" IPS OD x 3" NPT Female
By Spears Manufacturing
In Stock
$115.04

mpn: 867V-422CSR, ean: 0054211821220,

4.5 out of 5 stars with 29 reviews
This Spears CPVC clamp-on saddle has a female NPT threaded outlet for connecting to pipes or fittings with male NPT threaded ends, and is suitable for adding a 90-degree branch to a pipe. The stainless steel reinforcement increases the life of the outlet, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The saddle is made of medium gray CPVC (chlorinated polyvinyl chloride) for chemical and corrosion resistance, high strength, and better resistance to high


Palmers - Female Stabilizer Regulator, Low Pressure
Palmers - Female Stabilizer Regulator, Low Pressure
By Palmer's
In Stock
$122.85

ean: 0716808977474,

4.9 out of 5 stars with 261 reviews
+Our most popular regulator. Customers have used these on just about anything gas powered. Fully adjustable; 0-200 psi output - comes with a built in self resetting safety valve. Gauge port is opposite of the 90 degree output fitting on the side. Output: 1/8'' npt 27 female Input: Female .825x14 NGO threads Max input psi: 1800 Psi out: 0-200.


GF Signet P51530-P3 Type 515 Rotor-X Wet-Tap Mount Paddlewheel Flow Sensor, Polypropylene Body, Black PVDF Rotor, Titanium Pin, 0.5'' to 4'', 24''
GF Signet P51530-P3 Type 515 Rotor-X Wet-Tap Mount Paddlewheel Flow Sensor, Polypropylene Body, Black PVDF Rotor, Titanium Pin, 0.5" to 4", 24"
By GF Signet
In Stock
$325.00

mpn: P51530-P3,

4.6 out of 5 stars with 35 reviews
GF Signet P51530-P3: Paddlewheel PP 1/2-4 inch pipe. Specifications: GF Signet Type 515 Rotor-X Wet-Tap Mount Paddlewheel Flow Sensor, self-powered, Black PVDF Rotor, Polypropylene body, Titanium pin, 1/2-4 inch (DN15 to DN100) pipe size.Operating range: 0.3 to 6 m/s, 1 to 20 ft/s. Installs into pipe sizes DN15 to DN900. Power source: Self powered. Compatibility: 5090, 8150, 8550, 8900, 9900, 9900-1BC.


Dixon N37-45F40T  AHA4540T Series Aluminum Rocker Lug,  4.5'' FNST x 4'' MNPT
Dixon N37-45F40T AHA4540T Series Aluminum Rocker Lug, 4.5" FNST x 4" MNPT
By Dixon Valve & Coupling
In Stock
$161.22

mpn: N37-45F40T,

4.2 out of 5 stars with 160 reviews
Style N37, Hydrant Adapter Rocker Lug. Rocker Lug. Seamless aluminum extrusion, hard coat anodized.Style N37, Hydrant Adapter Rocker Lug. Female Thread Size 4.5'' x Male Thread Size 4''. Thread FNST x MNPT. Aluminum.


Spears 467-SR Series PVC Clamp-On Saddle with Buna O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 40, White, 8'' IPS OD x 4'' NPT Female
Spears 467-SR Series PVC Clamp-On Saddle with Buna O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 40, White, 8" IPS OD x 4" NPT Female
By Spears Manufacturing
In Stock
$178.29

mpn: 467-582SR, ean: 0054211406212,

4.8 out of 5 stars with 219 reviews
This Spears clamp-on saddle pipe fitting, in white, with a Buna-N O-ring seal, zinc bolts, and stainless-steel–reinforced outlet is made of schedule 40 PVC and has an IPS saddle fitting and a female NPT branch connection. This two-piece saddle pipe fitting clamps onto the pipe, and is secured with adhesive (not included) and bolts (included), to create a branch connection with one outlet. The Iron Pipe Size (IPS) saddle sits over a hole that has been drilled into the pipe to create the new


50 pcs, Legines Brass Pipe Fitting, Forged 90 Degree Female Elbow, 1/4'' NPT Feamle x 1/4'' NPT Female
50 pcs, Legines Brass Pipe Fitting, Forged 90 Degree Female Elbow, 1/4" NPT Feamle x 1/4" NPT Female
By Legines
In Stock
$165.99

ean: 6627145134342,

4.8 out of 5 stars with 121 reviews
Description: This 90-degree elbow pipe fitting is made of brass and has female National Pipe Taper (NPT) threaded connections. This 90-degree elbow fitting connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability, and it is forged to


Stainless Steel 304 Cast Pipe Fitting, 90 Degree Elbow, MSS SP-114, 4'' NPT Female
Stainless Steel 304 Cast Pipe Fitting, 90 Degree Elbow, MSS SP-114, 4" NPT Female
By Merit Brass
In Stock
$112.58

mpn: M401-64,

4.5 out of 5 stars with 201 reviews
The Merit Brass stainless steel 304 cast pipe fitting is a 90-degree elbow with female National Pipe Taper (NPT) threads for changing flow direction between two pipes. Made of stainless steel 304 to ensure higher corrosion resistance than 302 grade steel, this elbow meets standards MSS SP-114, ANSI B1.20.1, and ASTM A351 for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.


Stainless Steel 316/316L Butt-Weld Pipe Fitting, Short Radius 90 Degree Elbow, Schedule 10, 3'' Pipe Size
Stainless Steel 316/316L Butt-Weld Pipe Fitting, Short Radius 90 Degree Elbow, Schedule 10, 3" Pipe Size
By Merit Brass
In Stock
$168.96

mpn: 01608-48,

4.2 out of 5 stars with 244 reviews
The Merit Brass stainless steel 316/316L butt-weld short radius 90-degree elbow, schedule 10, is an unthreaded pipe fitting used to connect two pipes. The 90-degree angle can be used to change the direction of flow and connect two pieces of pipe or pipe fittings with butt-welds, which are beveled openings for welding pipes together. The low-carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 316 steel strength


Parker 4-4 MHN-SS Stainless Steel 316 Pipe Fitting, Hex Nipple, 1/4'' NPT Male x 1/4'' NPT Male, 1-7/16'' Length (Pack of 40)
Parker 4-4 MHN-SS Stainless Steel 316 Pipe Fitting, Hex Nipple, 1/4" NPT Male x 1/4" NPT Male, 1-7/16" Length (Pack of 40)
By Parker Hannifin
In Stock
$376.53

mpn: 4-4 MHN-SS,

4.6 out of 5 stars with 289 reviews
The Parker stainless steel 316 hexagonal nipple is a pipe fitting with male National Pipe Taper (NPT) threads on both ends for connecting and extending two pieces of female pipe. It has NPT threads for creating tighter seals than straight threads and is made from stainless steel 316, which is higher strength and more corrosion resistant than stainless steel 304. The hexagonal shape allows for increased leverage during installation and disassembly with a wrench. This fitting meets standards ANSI


K-Flex 801-LRE-100218 Closed Cell Elastomeric Insulation, 90 degree Elbow, 2-1/8'' Nominal Insulation ID, 1'' Wall Thickness, Black (Pack of 15)
K-Flex 801-LRE-100218 Closed Cell Elastomeric Insulation, 90 degree Elbow, 2-1/8" Nominal Insulation ID, 1" Wall Thickness, Black (Pack of 15)
By K-Flex
In Stock
$142.50

mpn: 801-LRE-100218, ean: 0841007132154,

4.5 out of 5 stars with 215 reviews
K-Flex K-Fit prefabricated fittings are the easiest, most reliable way to insulate pipe fittings. They are produced under controlled conditions in our manufacturing location using an automated process to ensure uniformity, good fit and watertight seams. For pipes greater than 4-inches IPS, fittings are butterfly design. For pipes 4-inches IPS and below, fittings are mitered. Fittings are non-porous, fiber-free, CFC free, and resist mold growth. They are used to retard heat gain and prevent


K-Flex 801-LRE-100258 Closed Cell Elastomeric Insulation, 90 degree Elbow, 2-5/8'' Nominal Insulation ID, 1'' Wall Thickness, Black (Pack of 11)
K-Flex 801-LRE-100258 Closed Cell Elastomeric Insulation, 90 degree Elbow, 2-5/8" Nominal Insulation ID, 1" Wall Thickness, Black (Pack of 11)
By K-Flex
In Stock
$183.53

mpn: 801-LRE-100258, ean: 0841007132208,

4.6 out of 5 stars with 222 reviews
K-Flex K-Fit prefabricated fittings are the easiest, most reliable way to insulate pipe fittings. They are produced under controlled conditions in our manufacturing location using an automated process to ensure uniformity, good fit and watertight seams. For pipes greater than 4-inches IPS, fittings are butterfly design. For pipes 4-inches IPS and below, fittings are mitered. Fittings are non-porous, fiber-free, CFC free, and resist mold growth. They are used to retard heat gain and prevent


NEW 8 INCH 90 DEGREE ELBOW SCH40 BLACK STEEL WELD
NEW 8 INCH 90 DEGREE ELBOW SCH40 BLACK STEEL WELD
By PRM
In Stock
$104.99

mpn: BSELB90800WELDX, ean: 0758576889924,

4.1 out of 5 stars with 62 reviews
90 DEGREE ELBOW LONG RADIUS SCH 40 BLACK STEEL BUTT WELD - A butt weld pipe fitting is designed to be welded on site at its ends to connect pipes together and allow change in direction, branching or ending. A butt weld pipe fitting is designed to be welded on site at its ends to connect pipes together and allow change in direction, branching or ending.8 Inch 90 Degree Elbow. Schedule 40. Black Carbon Steel. Butt Weld Pipe Fittings.


Dixon 3030RDSSAP Stainless Steel Tank Truck Fitting, Thread Adapter, 3'' BSPP Female x 3'' NPT Male
Dixon 3030RDSSAP Stainless Steel Tank Truck Fitting, Thread Adapter, 3" BSPP Female x 3" NPT Male
By Dixon Valve & Coupling
In Stock
$121.27

mpn: 3030RDSSAP,

4.9 out of 5 stars with 163 reviews
This Dixon 30RDSSAP series adapter is used for connecting or extending pipes going in the same direction. It has female British Standard Pipe Parallel (BSPP) threads on one end (for connecting to male threaded pipes) and male National Pipe Taper (NPT) threads on the other end for connecting to female threaded pipes. It is made of stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304. This fitting includes a polytetrafluoroethylene (PTFE) gasket for


Chrome Plated Brass Pipe Fitting, 90 Degree Street Elbow, 3/8'' NPT Male x Female
Chrome Plated Brass Pipe Fitting, 90 Degree Street Elbow, 3/8" NPT Male x Female
By Merit Brass
In Stock
$275.00

mpn: C103-06,

4.5 out of 5 stars with 295 reviews
The Merit Brass chrome-plated brass pipe fitting is a 90-degree street elbow with male and female National Pipe Taper (NPT) threads for changing flow direction between pipes. Made of brass with a high gloss, chrome-plated finish, this elbow is easier to clean than regular brass fittings and is more corrosion resistant than stainless steel. The fitting’s pressure ratings are 125 psi for steam and 200 psi for water, oil, and gas (W.O.G.), and it meets standards ASTM B-584, ANSI B 1.20.1, and


Merit Brass Stainless Steel 304/304L Pipe Fitting, Nipple, Schedule 40 Welded, 3/4'' x 2'' National Pipe Taper Thread Male (Pack of 25)
Merit Brass Stainless Steel 304/304L Pipe Fitting, Nipple, Schedule 40 Welded, 3/4" x 2" National Pipe Taper Thread Male (Pack of 25)
By Merit Brass
In Stock
$111.66

mpn: 4012-200,

4.4 out of 5 stars with 212 reviews
The Merit Brass nipple is a schedule 40 welded stainless steel 304/304L pipe fitting with male National Pipe Taper (NPT) threads for connecting and extending female threaded pipes. The fitting has NPT threads for creating tighter seals than straight threads. Made of stainless steel 304L, the lower carbon content of this pipe fitting ensures corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe fittings are components


GF Signet 3-2536-P0 Rotor-X Paddlewheel Flow Sensor, Polypropylene Body, Black PVDF Rotor, Titanium Pin, 0.5'' to 4'', 8''
GF Signet 3-2536-P0 Rotor-X Paddlewheel Flow Sensor, Polypropylene Body, Black PVDF Rotor, Titanium Pin, 0.5" to 4", 8"
By GF Signet
In Stock
$430.36
$399.95
You Save: 7%

mpn: 3-2536-P0,

4.8 out of 5 stars with 7 reviews
GF Signet 3-2536-P0: Paddlewheel PP 1/2-4 inch pipe. Specifications: GF Signet Rotor-X Paddlewheel Flow Sensor, Standard Mount, Polypropylene body, Black PVDF rotor, Titanium pin, 1/2-4 inch (DN15 to DN100) pipe size.Operating range: 0.3 to 6 m/s, 1 to 20 ft/s. Installs into pipe sizes DN15 to DN900. Power source: Self powered. Compatibility: 5090, 8150, 8550, 8900, 9900, 9900-1BC.


Merit Brass Chrome Plated Brass Pipe Fitting, 90 Degree Street Elbow, 1/2'' National Pipe Taper Thread Male (Pack of 25)
Merit Brass Chrome Plated Brass Pipe Fitting, 90 Degree Street Elbow, 1/2" National Pipe Taper Thread Male (Pack of 25)
By Merit Brass
In Stock
$290.31

mpn: C103-08,

4.2 out of 5 stars with 121 reviews
The Merit Brass chrome-plated brass pipe fitting is a 90-degree street elbow with male and female National Pipe Taper (NPT) threads for changing flow direction between pipes. Made of brass with a high gloss, chrome-plated finish, this elbow is easier to clean than regular brass fittings and is more corrosion resistant than stainless steel. The fitting’s pressure ratings are 125 psi for steam and 200 psi for water, oil, and gas (W.O.G.), and it meets standards ASTM B-584, ANSI B 1.20.1, and


Stainless Steel 316/316L Pipe Fitting, Flange, Socket Weld, Class 150, 4'' Pipe Size
Stainless Steel 316/316L Pipe Fitting, Flange, Socket Weld, Class 150, 4" Pipe Size
By Merit Brass
In Stock
$132.95

mpn: ac653l-64,

4.4 out of 5 stars with 244 reviews
The Merit Brass socket-weld flange is a class 150 stainless steel 316/316L pipe fitting used to join two sections of a piping system. This socket weld connection has an internal recess on the inside diameter to allow for a smooth bore and better fluid flow between pipes. The flange has bolt holes to connect to flat surfaces or other flanges. Made of stainless steel 316L, the lower carbon content of this fitting minimizes harmful carbide precipitation due to welding, ensuring corrosion


Chrome Plated Brass Pipe Fitting, Floor Flange, 1/4'' NPT Female
Chrome Plated Brass Pipe Fitting, Floor Flange, 1/4" NPT Female
By Merit Brass
In Stock
$493.75

mpn: C240-04,

4.0 out of 5 stars with 94 reviews
The Merit Brass floor flange is a chrome-plated brass pipe fitting with female National Pipe Taper (NPT) threads used to join two sections of a piping system. This floor flange connects threaded pipes to flat surfaces; the threaded hub allows the pipe to be screwed in and securely fastened. It has NPT threads for creating a tighter seal than straight threads and may require gaskets, which are sold separately. The flange also has bolt holes and can also be used to absorb vibrations. Made of


Flair-It Plus 07983 Plastic 12 Port Manifold with Valves, 0.5'' Size
Flair-It Plus 07983 Plastic 12 Port Manifold with Valves, 0.5" Size
By Flair-It Plus
In Stock
$157.30

mpn: 07983, ean: 0742979079839,

4.8 out of 5 stars with 231 reviews
The modular manifold assembly is customizable and easy to use. Standard 1/2” male threaded outlets make the Flair-It Plus manifolds versatile. Flair-It Plus manifolds meet IAPMO and NSF standards. 8-36 port models are available. Flair-It Plus manifolds are constructed of durable Udel Polysulfone (PSU) resin. PSU is a resilient plastic resin that is resistant to stress fractures and extreme temperatures. However, it is susceptible to Volatile Organic Compounds (VOCs) such as bug spray, certain



Viewing Page 5 of 12

View more products in Fittings.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - scrantonsewer.org. All Rights Reserved.