Browse Our Catalog

Protective Caps - Page 6


Save on Protective Caps at Scranton Sewer, Page 6. Top brands include Caplugs, MOCAP, & Cleartec Packaging. Hurry! Limited time offers. Offers valid only while supplies last.



Caplugs QECPM14Q1 Plastic Ergonomic Center Pull Tab Plug. ECP-M14, TEO, Cap OD 0.75" Plug ID 0.53", Orange (Pack of 1000)
By Caplugs
In Stock
$152.99

mpn: QECPM14Q1,

4.4 out of 5 stars with 152 reviews
Ecp Series ergonomic center pull-tab plugs offer the convenience of a center-pull tab plug in an ergonomic material. This Series is an excellent alternative to threaded plugs because it saves time and labor during instillation and removal of plugs. The tab is molded fully into the end and sidewalls of the plug so it does not break off during plug removal.:: a: 0.520, b: 0.53, C: 0.75, D: 0.31, E: 0.39.Imperial and metric thread pitches available. Color coded for size identification. Ergonomic


Caplugs 99190912 Cap for Threaded Connectors, Plastic, To Cap Nominal Thread Size 7/8", EC-14, Red (Pack of 1000)
By Caplugs
In Stock
$139.76

mpn: 99190912,

4.5 out of 5 stars with 56 reviews
The protect Series caps fit 36 and 86 pin Champ 050 Series connectors and 50-pin Champ Type connectors. Designed for easy application and removal in areas not readily accessible. Can be installed over threads or cylindrical surfaces.:: C nts: 7/8, a: 0.850, b: 1.13, C: 0.50, D: 0.90.Specs: nas 813 & nas 831. Nominal thread size range 1/4'' thru 5''. Flanged for easy installation and removal. Keeps out contaminants. Economically priced.


Caplugs 99191856 Plastic Plug for Square Tubing. SQR-1 1/2-14-20, PE-LD, To fit square tube size OD1.500" Wall thickness 14-20 Ga. (.083-.035)", Black (Pack of 200)
By Caplugs
In Stock
$177.95

mpn: 99191856,

4.7 out of 5 stars with 29 reviews
SQR Series square plugs feature a series of externally tapered ribs designed to accommodate a wide range of tubing gauges while also satisfying the fit adjustments on tubing with inside dimensional fluctuations. The exterior ribs are designed to provide a sure grip inside a tube without the unsightly plastic shavings found on many straight wall glide installations. Will not rust or corrode. : : A: 1.500, B: 0.52, TUBEOD IN: 1.500, WALL THICK: 14-20 Ga. (.083-.035).Broad selection of size and


Caplugs 99191578 Plastic Finishing Plug for Square Tubing. FP-125, PE-LD, To plug square tube size 0.75 To fit .065 (16 Ga.)", Black (Pack of 1000)
By Caplugs
In Stock
$180.81

mpn: 99191578,

4.4 out of 5 stars with 64 reviews
FP Series finishing plugs are designed for square tubing. The plugs are sized for different gauges. FP Series shoulders fit flush with tubing sides and keep dirt and moisture out of sensitive areas. The plugs protect against sharp tube edges and provide a clean finish on completed products.:: F TS: 0.75, wall thick:.065 (16 ga.).Range of tube plug sizes and wall thicknesses. Flush fit with tubing sides. Design for square tubing. Economically priced.


Caplugs 99191150 Plastic Threaded Plug for Pipe Fittings. P-28, PE-HD, To plug thread size 1/4 NPT", Red (Pack of 1000)
By Caplugs
In Stock
$142.38

mpn: 99191150,

4.4 out of 5 stars with 205 reviews
The P Series plugs plastic threaded plugs are designed to keep out moisture, dirt and other contaminants in pipe fittings. : : A:.50, B:.37, C:.25, TOFITTHRSZ: 1/4 NPT.For tapered and straight threads. Wide range of sizes. Keeps out contaminants. Economically priced.


Caplugs QE121AO1 Plastic Utility Plug. To fit thread size 7/8" E-12, PE-LD, To Fit Thread Size 7/8", Yellow (Pack of 900)
By Caplugs
In Stock
$144.21

mpn: QE121AO1,

4.2 out of 5 stars with 218 reviews
The E series utility plugs are straight-sided, thin-walled closures designed to protect threaded connectors. The flanged end makes for easy removal in hard-to-reach areas. The versatile design of these plugs make them ideal for use in a variety of threaded and non-threaded applications. : : A:.850, B:.790, C:.63, D: 1.00, TOFITTHRSZ: 7/8.Plugs for electrical connectors. Parts for wide range of thread sizes. Keeps out debris. Flanged for easy installation and removal. Economically priced.


Caplugs 99394672 Plastic Threaded Plug for Pipe Fittings. P-28B, PE-HD, To plug thread size 1/4 NPT", Red (Pack of 200)
By Caplugs
In Stock
$100.12

mpn: 99394672,

4.4 out of 5 stars with 42 reviews
The P Series plugs plastic threaded plugs are designed to keep out moisture, dirt and other contaminants in pipe fittings. : : A:.74, B:.37, C:.68, TOFITTHRSZ: 1/4 NPT.For tapered and straight threads. Wide range of sizes. Keeps out contaminants. Economically priced.


Caplugs 99192273 masking Flexible Round Cap . HVC-080-10, VINYL, Cap ID 0.080" Length 0.625", Black (Pack of 1000)
By Caplugs
In Stock
$138.71

mpn: 99192273,

4.5 out of 5 stars with 254 reviews
The hvc Series Flex500 vinyl caps are temperature-resistant and protect up to 500 Degrees Fahrenheit. They are extremely flexible and durable protective closures which are ideal for use as thread Protectors, dust and moisture seals, and Act as masking caps during painting, plating or powder coating operations.:: a: 0.080, b: 0.14, C: 0.625.Flexible vinyl material will withstand 500 f (260 c). Various diameter and lengths available. Keeps out debris. Economically priced.


RVGC9097-10 .500-3 Grip Black - MOCAP (qty 1080)
By MOCAP
In Stock
$424.44

mpn: RVGC9097-10-B,

4.2 out of 5 stars with 117 reviews
MOCAP dip molded vinyl plastic grips improve appearance and comfort for items with handles, levers or grips. Our round vinyl grips are available in a variety of materials, colors, hardness durometers (soft, semi-rigid or hard), diameters, and lengths (some grip sizes can be produced up to 21' long) to fit your application.Choose from our many material options including our traditional smooth & glossy vinyl plastic or our textured rubber like material. Flexible but durable materials can stretch


Cleartec GRPM100313L07 5/16" GRIP PAK 10 PLUG LDPE BLUE-MID (qty 500)
By Cleartec Packaging
In Stock
$131.25

mpn: GRPM100313L07-0500_GRPF100067C00-0500,

4.5 out of 5 stars with 169 reviews
NEW Grip Paks provide individual packaging for end mills, drills, solid carbide tooling and other cutting tools. They provide ideal protection and excellent presentation display. Inside Length: 2.50in / Inside Width: 0.52inCap Material: Polypropylene (CLARIFIED). Base Material: LDPE (VARIOUS COLORS). Stocked Material: LDPE (MID BLUE), LDPE (RED). Caps are only stocked in clear polypropylene material, but may be paired with any color base.. Stocked and available for purchase in small


Cleartec GRPM200750L02 3/4" GRIP PAK 20 PLUG LDPE RED (qty 100)
By Cleartec Packaging
In Stock
$111.76

mpn: GRPM200750L02-0100_GRPF200107C00-0100,

4.9 out of 5 stars with 99 reviews
NEW Grip Paks provide individual packaging for end mills, drills, solid carbide tooling and other cutting tools. They provide ideal protection and excellent presentation display. Inside Length: 4.00in / Inside Width: 0.94inCap Material: Polypropylene (CLARIFIED). Base Material: LDPE (VARIOUS COLORS). Stocked Material: LDPE (MID BLUE), LDPE (RED). Caps are only stocked in clear polypropylene material, but may be paired with any color base.. Stocked and available for purchase in small


Cleartec GRPM200750L07 3/4" GRIP PAK 20 PLUG LDPE BLUE-MID (qty 100)
By Cleartec Packaging
In Stock
$111.76

mpn: GRPM200750L07-0100_GRPF200107C00-0100,

4.3 out of 5 stars with 67 reviews
NEW Grip Paks provide individual packaging for end mills, drills, solid carbide tooling and other cutting tools. They provide ideal protection and excellent presentation display. Inside Length: 4.00in / Inside Width: 0.94inCap Material: Polypropylene (CLARIFIED). Base Material: LDPE (VARIOUS COLORS). Stocked Material: LDPE (MID BLUE), LDPE (RED). Caps are only stocked in clear polypropylene material, but may be paired with any color base.. Stocked and available for purchase in small


Cleartec GRPM100375L07 3/8" GRIP PAK 10 PLUG LDPE BLUE-MID (qty 500)
By Cleartec Packaging
In Stock
$131.25

mpn: GRPM100375L07-0500_GRPF100067C00-0500,

4.8 out of 5 stars with 224 reviews
NEW Grip Paks provide individual packaging for end mills, drills, solid carbide tooling and other cutting tools. They provide ideal protection and excellent presentation display. Inside Length: 2.50in / Inside Width: 0.52inCap Material: Polypropylene (CLARIFIED). Base Material: LDPE (VARIOUS COLORS). Stocked Material: LDPE (MID BLUE), LDPE (RED). Caps are only stocked in clear polypropylene material, but may be paired with any color base.. Stocked and available for purchase in small


Cleartec GRPM080188L02 3/16" GRIP PAK 08 PLUG LDPE RED (qty 1000)
By Cleartec Packaging
In Stock
$187.40

mpn: GRPM080188L02-1000_GRPF080053C00-1000,

4.8 out of 5 stars with 89 reviews
NEW Grip Paks provide individual packaging for end mills, drills, solid carbide tooling and other cutting tools. They provide ideal protection and excellent presentation display. Inside Length: 2.00in / Inside Width: 0.43inCap Material: Polypropylene (CLARIFIED). Base Material: LDPE (VARIOUS COLORS). Stocked Material: LDPE (MID BLUE), LDPE (RED). Caps are only stocked in clear polypropylene material, but may be paired with any color base.. Stocked and available for purchase in small


Cleartec GRPM080250L02 1/4" GRIP PAK 08 PLUG LDPE RED (qty 1000)
By Cleartec Packaging
In Stock
$187.40

mpn: GRPM080250L02-1000_GRPF080053C00-1000,

4.3 out of 5 stars with 166 reviews
NEW Grip Paks provide individual packaging for end mills, drills, solid carbide tooling and other cutting tools. They provide ideal protection and excellent presentation display. Inside Length: 2.00in / Inside Width: 0.43inCap Material: Polypropylene (CLARIFIED). Base Material: LDPE (VARIOUS COLORS). Stocked Material: LDPE (MID BLUE), LDPE (RED). Caps are only stocked in clear polypropylene material, but may be paired with any color base.. Stocked and available for purchase in small


Cleartec GRPM160563L07 9/16" GRIP PAK 16 PLUG LDPE BLUE-MID (qty 500)
By Cleartec Packaging
In Stock
$200.75

mpn: GRPM160563L07-0500_GRPF160107C00-0500,

4.4 out of 5 stars with 135 reviews
NEW Grip Paks provide individual packaging for end mills, drills, solid carbide tooling and other cutting tools. They provide ideal protection and excellent presentation display. Inside Length: 4.00in / Inside Width: 0.78inCap Material: Polypropylene (CLARIFIED). Base Material: LDPE (VARIOUS COLORS). Stocked Material: LDPE (MID BLUE), LDPE (RED). Caps are only stocked in clear polypropylene material, but may be paired with any color base.. Stocked and available for purchase in small


Cleartec GRPM100375L02 3/8" GRIP PAK 10 PLUG LDPE RED (qty 500)
By Cleartec Packaging
In Stock
$131.25

mpn: GRPM100375L02-0500_GRPF100067C00-0500,

4.2 out of 5 stars with 199 reviews
NEW Grip Paks provide individual packaging for end mills, drills, solid carbide tooling and other cutting tools. They provide ideal protection and excellent presentation display. Inside Length: 2.50in / Inside Width: 0.52inCap Material: Polypropylene (CLARIFIED). Base Material: LDPE (VARIOUS COLORS). Stocked Material: LDPE (MID BLUE), LDPE (RED). Caps are only stocked in clear polypropylene material, but may be paired with any color base.. Stocked and available for purchase in small


Cleartec GRPM080125L02 1/8" GRIP PAK 08 PLUG LDPE RED (qty 1000)
By Cleartec Packaging
In Stock
$187.40

mpn: GRPM080125L02-1000_GRPF080053C00-1000,

4.5 out of 5 stars with 31 reviews
NEW Grip Paks provide individual packaging for end mills, drills, solid carbide tooling and other cutting tools. They provide ideal protection and excellent presentation display. Inside Length: 2.00in / Inside Width: 0.43inCap Material: Polypropylene (CLARIFIED). Base Material: LDPE (VARIOUS COLORS). Stocked Material: LDPE (MID BLUE), LDPE (RED). Caps are only stocked in clear polypropylene material, but may be paired with any color base.. Stocked and available for purchase in small


Cleartec GRPM080125L07 1/8" GRIP PAK 08 PLUG LDPE BLUE-MID (qty 1000)
By Cleartec Packaging
In Stock
$187.40

mpn: GRPM080125L07-1000_GRPF080053C00-1000,

4.0 out of 5 stars with 250 reviews
NEW Grip Paks provide individual packaging for end mills, drills, solid carbide tooling and other cutting tools. They provide ideal protection and excellent presentation display. Inside Length: 2.00in / Inside Width: 0.43inCap Material: Polypropylene (CLARIFIED). Base Material: LDPE (VARIOUS COLORS). Stocked Material: LDPE (MID BLUE), LDPE (RED). Caps are only stocked in clear polypropylene material, but may be paired with any color base.. Stocked and available for purchase in small


Cleartec GRPM130438L02 7/16" GRIP PAK 13 PLUG LDPE RED (qty 500)
By Cleartec Packaging
In Stock
$137.20

mpn: GRPM130438L02-0500_GRPF130079C00-0500,

4.2 out of 5 stars with 228 reviews
NEW Grip Paks provide individual packaging for end mills, drills, solid carbide tooling and other cutting tools. They provide ideal protection and excellent presentation display. Inside Length: 3.00in / Inside Width: 0.63inCap Material: Polypropylene (CLARIFIED). Base Material: LDPE (VARIOUS COLORS). Stocked Material: LDPE (MID BLUE), LDPE (RED). Caps are only stocked in clear polypropylene material, but may be paired with any color base.. Stocked and available for purchase in small



Viewing Page 6 of 12

View more products in Hydraulics, Pneumatics & Plumbing.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - scrantonsewer.org. All Rights Reserved.