Rubber Tubing - Page 4 - Blowout Sale! Save up to 52%


Blowout Sale! Up to 52% off on Rubber Tubing at Scranton Sewer, Page 4. Top brands include Small Parts, K-Flex USA, & Jason Industrial. Hurry! Limited time offers. Offers valid only while supplies last.



Black Viton Soft Tubing, 1/2" ID, 7/8" OD, 3/16" Wall, 25' Length
By Small Parts
In Stock
$252.36

mpn: VITB-500B-25,

4.2 out of 5 stars with 39 reviews
Made of 100 percent pure Type B Viton, a high performance synthetic rubber. Specifically deisgned for use with peristaltic pumps, this tubing has excellent temperature resistance with an operating range of -40 F to 400 F continuously; 600 F periodically. It also offers the widest range of fluid and chemical resistance of any commercial rubber - oils, fuels, lubricants, most mineral acids, also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene,


K-Flex USA 6RX048048 Insul-Tube, 1/2" x 1/2" W x 72", 6' Piece
By K-Flex USA
In Stock
$203.89

mpn: 6RX048048,

4.7 out of 5 stars with 247 reviews
INSUL-TUBE pipe insulations widely recognized by the HVAC/R and Plumbing wholesale trade as having superior product characteristics, including cold weather flexibility, durable skin surface and exacting manufacturing tolerances.Moisture Vapor Resistance. Condensation Control. 3' and 6' lengths available. Greengard certified as a low VOC material. Temperature range: -297°F to 220°F (-182°C to 104°C).


Jason Industrial 6341-3248 Series 6341 Skirtboard Rubber, Square Edge, 1" Gauge x 48" Width, 50' Length, 8"
By Jason Industrial
In Stock
$8,562.38
$4,277.90
You Save: 50%

mpn: 6341-3248,

4.6 out of 5 stars with 41 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec.The 1/2'' size is not specified to any Mil spec. With the exception of the 1/2'' size, all other sizes are supplied with safety pins,


Jason Industrial 6341-3208 Series 6341 Skirtboard Rubber, Square Edge, 1" Gauge x 8" Width, 50' Length, 1-1/4"
By Jason Industrial
In Stock
$563.08

mpn: 6341-3208,

4.5 out of 5 stars with 204 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec.The 1/2'' size is not specified to any Mil spec. With the exception of the 1/2'' size, all other sizes are supplied with safety pins,


Jason Industrial 6341-3207 Series 6341 Skirtboard Rubber, Square Edge, 1" Gauge x 7" Width, 50' Length, 1"
By Jason Industrial
In Stock
$876.84
$623.86
You Save: 29%

mpn: 6341-3207,

4.3 out of 5 stars with 12 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec.The 1/2'' size is not specified to any Mil spec. With the exception of the 1/2'' size, all other sizes are supplied with safety pins,


Jason Industrial 6341-3212 Series 6341 Skirtboard Rubber, Square Edge, 1" Gauge x 12" Width, 50' Length, 5"
By Jason Industrial
In Stock
$508.35

mpn: 6341-3212,

4.7 out of 5 stars with 116 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec.The 1/2'' size is not specified to any Mil spec. With the exception of the 1/2'' size, all other sizes are supplied with safety pins,


Jason Industrial 6341-2408 Series 6341 Skirtboard Rubber, Square Edge, 3/4" Gauge x 8" Width, 50' Length, 1-1/4"
By Jason Industrial
In Stock
$293.91

mpn: 6341-2408,

4.0 out of 5 stars with 167 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec. The 1/2'' size is not specified to any Mil spec. The 8'' comes in two different styles. That size will interchange as follows: Jason


Jason Industrial 6341-3203 Series 6341 Skirtboard Rubber, Square Edge, 1" Gauge x 3" Width, 50' Length, 2"
By Jason Industrial
In Stock
$168.83

mpn: 6341-3203,

4.5 out of 5 stars with 39 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec.The 1/2'' size is not specified to any Mil spec. With the exception of the 1/2'' size, all other sizes are supplied with safety pins,


Jason Industrial 6341-2412 Series 6341 Skirtboard Rubber, Square Edge, 3/4" Gauge x 12" Width, 50' Length, 1"
By Jason Industrial
In Stock
$621.11

mpn: 6341-2412,

4.6 out of 5 stars with 300 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec. The 1/2'' size is not specified to any Mil spec. The 8'' comes in two different styles. That size will interchange as follows: Jason


Jason Industrial 6341-2410 Series 6341 Skirtboard Rubber, Square Edge, 3/4" Gauge x 10" Width, 50' Length, 1/2"
By Jason Industrial
In Stock
$560.53
$531.29
You Save: 5%

mpn: 6341-2410,

4.0 out of 5 stars with 29 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec. The 1/2'' size is not specified to any Mil spec. The 8'' comes in two different styles. That size will interchange as follows: Jason


Jason Industrial 6341-3204 Series 6341 Skirtboard Rubber, Square Edge, 1" Gauge x 4" Width, 50' Length, 2-1/2"
By Jason Industrial
In Stock
$271.57
$203.13
You Save: 25%

mpn: 6341-3204,

4.0 out of 5 stars with 51 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec.The 1/2'' size is not specified to any Mil spec. With the exception of the 1/2'' size, all other sizes are supplied with safety pins,


Jason Industrial 6341-2406 Series 6341 Skirtboard Rubber, Square Edge, 3/4" Gauge x 6" Width, 50' Length, 1"
By Jason Industrial
In Stock
$407.55
$393.74
You Save: 3%

mpn: 6341-2406,

4.2 out of 5 stars with 10 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec. The 1/2'' size is not specified to any Mil spec. The 8'' comes in two different styles. That size will interchange as follows: Jason


Jason Industrial 6341-2448 Series 6341 Skirtboard Rubber, Square Edge, 3/4" Gauge x 48" Width, 50' Length, 3/4"
By Jason Industrial
In Stock
$2,022.38

mpn: 6341-2448,

4.4 out of 5 stars with 228 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec. The 1/2'' size is not specified to any Mil spec. The 8'' comes in two different styles. That size will interchange as follows: Jason


Jason Industrial 6341-2405 Series 6341 Skirtboard Rubber, Square Edge, 3/4" Gauge x 5" Width, 50' Length, 2"
By Jason Industrial
In Stock
$160.73

mpn: 6341-2405,

4.3 out of 5 stars with 152 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec. The 1/2'' size is not specified to any Mil spec. The 8'' comes in two different styles. That size will interchange as follows: Jason


Jason Industrial 6341-1612 Series 6341 Skirtboard Rubber, Square Edge, 1/2" Gauge x 12" Width, 50' Length, 2-1/2"
By Jason Industrial
In Stock
$471.60
$224.48
You Save: 52%

mpn: 6341-1612,

4.5 out of 5 stars with 45 reviews
Jason Ferrules and Sleeves are designed to be used with Jason Combination Hose Nipples and the Part ''C'' and ''E'' Cam & Groove fittings (crimp style only). For crimp O.D.'s, please refer to pages 100 to 105. Working pressures are determined by the type of hose and coupling used in the application.8'' Hose Inside Diameter. 8-8/16'' Ferrule Inside Diameter. Plated Steel Sleeve Material.


Jason Industrial 6341-1648 Series 6341 Skirtboard Rubber, Square Edge, 1/2" Gauge x 48" Width, 50' Length, 6"
By Jason Industrial
In Stock
$1,348.73

mpn: 6341-1648,

4.6 out of 5 stars with 202 reviews
Male end fits coupler or Dust Cap. Female thread end is NPT. Sizes 3/4'', 1'', 1-1/4'', 1-1/2'', 2'', 2-1/2'', 3'', 4'' and 6'' are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard. Size 5'' complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec. The 1/2'' size is not specified to any Mil spec. The 8'' comes in two different styles. That size will interchange as follows: Jason


Jason Industrial 6341-1606 Series 6341 Skirtboard Rubber, Square Edge, 1/2" Gauge x 6" Width, 50' Length, 1-1/4"
By Jason Industrial
In Stock
$190.68

mpn: 6341-1606,

4.2 out of 5 stars with 270 reviews
Jason Ferrules and Sleeves are designed to be used with Jason Combination Hose Nipples and the Part ''C'' and ''E'' Cam & Groove fittings (crimp style only). For crimp O.D.'s, please refer to pages 100 to 105. Working pressures are determined by the type of hose and coupling used in the application.6'' Hose Inside Diameter. 6-14/16'' Ferrule Inside Diameter. Plated Steel Sleeve Material.


Jason Industrial 6341-1607 Series 6341 Skirtboard Rubber, Square Edge, 1/2" Gauge x 7" Width, 50' Length, 1-1/2"
By Jason Industrial
In Stock
$148.25

mpn: 6341-1607,

4.8 out of 5 stars with 233 reviews
Jason Ferrules and Sleeves are designed to be used with Jason Combination Hose Nipples and the Part ''C'' and ''E'' Cam & Groove fittings (crimp style only). For crimp O.D.'s, please refer to pages 100 to 105. Working pressures are determined by the type of hose and coupling used in the application.6'' Hose Inside Diameter. 7-2/16'' Ferrule Inside Diameter. Plated Steel Sleeve Material.


Jason Industrial 6341-1608 Series 6341 Skirtboard Rubber, Square Edge, 1/2" Gauge x 8" Width, 50' Length, 2-1/2"
By Jason Industrial
In Stock
$166.13

mpn: 6341-1608,

4.6 out of 5 stars with 256 reviews
Jason Ferrules and Sleeves are designed to be used with Jason Combination Hose Nipples and the Part ''C'' and ''E'' Cam & Groove fittings (crimp style only). For crimp O.D.'s, please refer to pages 100 to 105. Working pressures are determined by the type of hose and coupling used in the application.6'' Hose Inside Diameter. 7-6/16'' Ferrule Inside Diameter. Plated Steel Sleeve Material.


Jason Industrial 6341-1610 Series 6341 Skirtboard Rubber, Square Edge, 1/2" Gauge x 10" Width, 50' Length, 2"
By Jason Industrial
In Stock
$206.63

mpn: 6341-1610,

4.9 out of 5 stars with 35 reviews
Jason Ferrules and Sleeves are designed to be used with Jason Combination Hose Nipples and the Part ''C'' and ''E'' Cam & Groove fittings (crimp style only). For crimp O.D.'s, please refer to pages 100 to 105. Working pressures are determined by the type of hose and coupling used in the application.8'' Hose Inside Diameter. 8-7/16'' Ferrule Inside Diameter. Plated Steel Sleeve Material.



Viewing Page 4 of 10

View more products in Tubing.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - scrantonsewer.org. All Rights Reserved.