Valves - Page 8 - Extreame Savings! Save up to 41%

Extreame Savings! Up to 41% off on Valves at Scranton Sewer, Page 8. Top brands include Watts, Apollo Valve, Sharpe Valves, Asco, TeeJet, Enerpac, Plast-O-Matic, Youli, BPM, Robert Manufacturing, Apollo, Red Dragon, Mansfield Plumbing, Studor, Dixon Valve & Coupling, Zurn, Vixen Air, & U.S. Solid. Hurry! Limited time offers. Offers valid only while supplies last.

3/4" 40XL-5 T&P Relief Valve (150 psi)
By Watts
In Stock

mpn: Cab-156731, ean: 7436803817874,

4.1 out of 5 stars with 183 reviews
Note: This item does not comply with the 2014 Lead Free Act. It may not be used in potable water applications as of January 4, 2014. For potable water applications 0556016 is recommended.Series 40L, 40XL Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature a bronze body with NPT male inlet and NPT female outlet connections,

Apollo 61-100 Series Bronze Check Valve, Ball Cone, 1-1/2" NPT Female
By Apollo Valve
In Stock

mpn: 6110701, ean: 0670750632211,

4.6 out of 5 stars with 276 reviews
The Apollo 61-100 series bronze ball cone check valve with female National Pipe Taper (NPT) threads on both ends is a class 125 valve used for restricting flow to one direction. It has a spring-loaded ball cone that sits against the seat of the valve to block reverse flow. The check valve's body is made of American Society of Testing and Materials (ASTM) B-584 bronze for strength and corrosion resistance. This valve has maximum pressure ratings of 400 pounds per square inch (gauge) (psig) for

Sharpe Valves 50C767 Series Stainless Steel 316 Ball Valve, Two Piece, Inline, Lever Handle, 1/2" NPT Female
By Sharpe Valves
In Stock

mpn: SV50C767, ean: 0092201391575,

4.0 out of 5 stars with 249 reviews
The Sharpe Valves 50C76 series stainless steel 316 two-piece inline ball valve has a lever handle and National Pipe Taper (NPT) male threads on both ends. This valve body is made of stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304. Stainless steel 316 is sometimes called ''marine-grade stainless steel'' due to its resistance to chloride corrosion. This valve has a lever handle for manual on/off control. Polyether ether ketone (PEEK) seats reduce

ASCO 8290A792 Stainless Steel Body Air/Water Pilot Operated Angle Body Multi-Purpose Valve, 1/2" Pipe Size, 2-Way Normally Closed, Entry Under the Disc, PTFE Sealing, 32 mm Valve Head Diameter, 1/2" O
By Asco
In Stock

mpn: 8290A792,

4.0 out of 5 stars with 269 reviews
ASCO's 2-way piston operated process valve assembly with HS series position indicator, and solenoid pilot valve. A cost effective alternative to an actuated ball valve assembly, this linear on/off valve is your stand alone solution that can be used in a variety of applications. Versatile, proven, and reliable, the 8290 series process valve is available in Bronze or Stainless Steel. All components are backed and manufactured by ASCO.Normally closed operation. Straight through flow for maximum

TeeJet AA144A-1-VI DirectoValve w/ Viton
By TeeJet
In Stock

mpn: AA144A-1-VI, ean: 0736354833710,

4.9 out of 5 stars with 12 reviews
DirectoValve Control Valve with Viton seals is a 2-Way Electrically operated solenoid valve. Manufactured with a polypropylene body for chemical resistance. No stroke adjustment is required.Flow Rate: 10 GPM (38 l/min) at 5 PSI. Can be ganged with other 144A DirectoValve control valves. Fabric reinforced diaphragms. 2.5 amp current draw.

Enerpac V-66 Manually-Operated Check Valve
By Enerpac
In Stock
You Save: 12%

mpn: V66, ean: 0662005108312,

4.3 out of 5 stars with 14 reviews
This Enerpac V-66 manually-operated check valve ensures the flow of oil in only direction when the hydraulic cylinder's piston extends and allows the oil to flow back during piston retraction when the lever is turned by hand. The valve has 3/8''-18 National Pipe Thread Fuel (NPTF) connections hook up to the hydraulic system with a double or single acting cylinder (sold separately) for use in load-holding applications. The valve is rated for 10,000-psi (pounds per square inch) operating

Plast-O-Matic FC Series PVC Flow Control Valve, For Ultra-Pure and Corrosive Liquids, 1 gpm, 1/2" NPT Female
By Plast-O-Matic
In Stock

mpn: FC050EP-001-000-PV,

4.1 out of 5 stars with 144 reviews
Flow Control Valves - Constant flow rate thermoplastic valves for ultra-pure and corrosive liquids. The standard Series ''FC'' flow controls are constructed of TYPE 1, GRADE 1 PVC (Polyvinyl Chloride) with diaphragms of EPDM. The Series ''FC'' flow controls are used to maintain a constant pre-determined flow in a system. They must be installed in the correct flow direction (indicated by label) to work properly. They utilize a diaphragm which changes shape with inlet pressure changes, thus

VA MB-2-1S-3/18L/E-8 - Youli Single Spool Monoblock Valve. Spring Centered. Cylinder Spool. 900 - 2900 PSI relief. #8 SAE Ports. Open Center. 12 GPM.
By Youli
In Stock

mpn: VA MB-2-1S-3/18L/E-8,

4.2 out of 5 stars with 271 reviews
Youli Single Spool Monoblock Valve Spring Centered Cylinder Spool (Tandem Center) 900 - 2,900 PSI Relief Valve - adjustable #8 SAE/ORB Ports Open Center 12 GPM MaxYouli Single Spool Monoblock Valve. Spring Centered. Cylinder Spool. 900 - 2900 PSI relief. #8 SAE Ports. Open Center. 12 GPM..

Apollo Valve 14-200 Series Bronze Safety Relief Valve, ASME Steam, 15 psi Set Pressure, 3" NPT Male x Female
By Apollo Valve
SKU: #CON14-207-08
In Stock

sku: CON14-207-08, mpn: 1420708, ean: 0670750498527,

4.6 out of 5 stars with 217 reviews
This Apollo Valve 14-200 series relief valve is a high-capacity steam safety valve. It has a cast bronze body, a 15 pounds per square inch (psi) relief pressure, a 3'' male National Pipe Thread (NPT) inlet connection and 3'' female NPT outlet, and a polytetrafluoroethylene (PTFE) coated disc. The valve's body and nozzle are brass and the spring is steel for resistance to corrosion. The seat is a PTFE-coated EPDM (ethylene propylene diene monomer) O-ring for positive seal, resistance to high

IPS Full Port Brass Ball Valve – Threaded 600 WOG (Lead Free) – 10 Pack (1”)
In Stock

mpn: 2940165, ean: 0643907877476,

4.9 out of 5 stars with 136 reviews
Features: * Solid Chrome Plated Brass Ball * Working Pressure 600WOG * Minimal pressure drop due to large full size ports * Suitable for full range of liquids and gas * Fast 1/4 turn open or closed operation * Flow can go both directions * Low operation torque * Each valve individually tested * Sweat on both ends * Yellow vinyl insulator on heavy duty plated steel handles* Solid Chrome Plated Brass Ball. * Working Pressure 600WOG. * Minimal pressure drop due to large full size ports. * Suitable

Robert Manufacturing R605T-2-5 High Turbo Series Bob Red Brass Float Valve Assembly with Stem and Float, 2" NPT Female Inlet x Free Flow Outlet, 115 psi Pressure
By Robert Manufacturing
In Stock
You Save: 4%

mpn: R605T-2-5,

4.6 out of 5 stars with 57 reviews
Standard Bob float valve assemblies consist of valve, brass stem, and float ball for positive water level control. Applicable for precision liquid level control, aggressive water applications, increased resistance to corrosion and chemicals, de-ionized, ultra pure, and reverse osmosis water, boiler feed water systems, kitchen steam tables, cooling towers, evaporative coolers, livestock waterier, car wash, high pressure wash, swimming pools, industrial tanks, food service and sanitary

Apollo 4ALF-205-A2F 4ALF205T2F 1" Bronze Reduced Pressure Zone Lead Free Backflow Preventer Valve w/ Ball Valves & SAE Test Cocks ,4ALF205A2F 4ALF-205-T2F 1 Inch
By Apollo
In Stock

mpn: 4ALF205A2F, ean: 0763935481770,

4.2 out of 5 stars with 102 reviews
The Apollo Series RP-4A Reduced Pressure Principle Backflow Preventer is designed to give maximum protection against Backflow caused by either back-pressure or back-siphonage from substances that are hazardous. The durable but economical device is easily maintained in the line with modular check cartridge assemblies that require no special tools. It consists of two independently acting springloaded check valves with an automatic di''erential relief valve located between the check valves. All

Red Dragon V-880 PH-1 Squeeze Valve with Adjustable Pilot and Torch Handle Kit
By Red Dragon
In Stock
You Save: 40%

mpn: B000KKR66G, ean: 5448095856600,

4.3 out of 5 stars with 53 reviews
Squeeze Valve with Adjustable Pilot and Torch HandleAllows you to add a squeeze valve and handle to most Red Dragon Vapor Torch Kit. Perfect for those who use a Red Dragon Torch Kit for spot weeding. This kit will quickly pay for itself in propane savings. The all-brass squeeze valve has an adjustable pilot feature. This is a high pressure valve tested to 350 lbs working pressure.

Mansfield Plumbing 08-11-1/2 Fill Valve
By Mansfield Plumbing
In Stock
You Save: 10%

mpn: 08-11-1/2, ean: 0046587001139,

4.4 out of 5 stars with 48 reviews
Mansfield Fill Valve - Fill valve for the model - Fill valve for the modelUnited States.

Studor 20346 Redi Vent
By Studor
In Stock

mpn: 20346, ean: 5899405946366,

4.4 out of 5 stars with 222 reviews
Compact Design For Tight Applications Vents Up To 6 Dfu'S Unique Patented Ball Valve Sealing Assembly Solvent Welds To 1-1/2'' Or 2'' Pipe Size Limited Lifetime Warranty For Replacement Of Defective Valves Listed To Nsf-14 And Asse 1051 Standards Warnock Hershey Listed Made in: United States Dimensions: 3.75 X 3 X 3Brand: Ips Corporation Item Weight: 0.325includes: Unit Instruction GuidePlumbing/Plumbing Vents. Made in: United States. Dimensions: 3.75 X 3 X 3.

Dixon FBVG75 Brass Ball Valve, 3/4" NPT Female
By Dixon Valve & Coupling
In Stock
You Save: 2%

mpn: FBVG75,

4.6 out of 5 stars with 124 reviews
This Dixon FBVG75 ball valve is made of forged brass for higher corrosion resistance than steel and has a plastic-covered lever handle for on/off manual control. This inline valve has a full port flow for higher operating efficiency than standard port and 3/4'' female National Pipe Taper (NPT) threads for connecting two male threaded pipes going in the same direction. It is pressure rated to 600 pounds per square inch (psi) at a maximum operating temperature of 248 degrees F. This full port

Zurn RK34-975XLC Wilkins Complete Repair Kit for Models 975XL/975XL2, 0.75" to 1" Sizes and for 3/4" to 1" Backflow Preventer
By Zurn
In Stock
You Save: 41%

mpn: RK34-975XLC, ean: 0612052093406,

4.8 out of 5 stars with 54 reviews
Zurn Engineered Water Solutions is a recognized leader in commercial, municipal, and industrial markets, delivering sustainable building solutions for new construction and retrofit applications. At Zurn we are committed to providing smart solutions that save both time and money. This repair kit includes 2 cover O-rings, 2 poppet assemblies, 1 no. 1 check spring, 1 no. 2 check spring, 1 relief valve stem assembly, 1 relief valve spring, and 1 seat repair kit (RK34-975XLSK). This complete

Vixen Air 1/2" NPT Air Ride Suspension High Flow Electric Air Valves/Solenoids 210 PSI Two Corners VXF2012-4
By Vixen Air
In Stock

mpn: VXF20124, ean: 0636967107270,

4.6 out of 5 stars with 296 reviews
These four powerful ½'' NPT air valves with exceptional high flow deliver unparalleled performance for 12V vehicles. The unique design provides high pressure control at minimal power consumption. Valves support pressures of up to 210 PSI and are constructed with high quality brass to ensure continuous use through extreme conditions. Solenoids are pre-wired, a metal mounting bracket is included for each valve, and the air flow direction is clearly marked with an arrow to provide an easy

Robert Manufacturing R452-12 Brass Stem, 3/8"-16 SAE Male, 12" Length
By Robert Manufacturing
In Stock

mpn: R452-12,

4.3 out of 5 stars with 240 reviews
Brass metal rod. Male thread on both ends. 12'' Length. 3/8''-16 SAE male.Brass metal rod. Male thread on both ends. Not compliant with CA Prop 65 or Safe Water Drinking Act.

3/4" Brass Electric Solenoid Valve 110V AC Normally Closed water, air, diesel.
By U.S. Solid
In Stock

mpn: USS2-00007, ean: 0853996003308,

4.7 out of 5 stars with 174 reviews
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, three-quarter inch (3/4'') female threaded (NPT) connections, and heat and oil resistant Viton gasket. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for

Viewing Page 8 of 11

View more products in Hydraulics, Pneumatics & Plumbing.
Feel free to Browse Our Catalog.

Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - All Rights Reserved.