Valves - Page 4 - Extreame Savings! Save up to 45%
Extreame Savings! Up to 45% off on Valves at Scranton Sewer, Page 4. Top brands include Prince, Sxstar, Febco, Garland, Prince Manufacturing, Akent, Dixon Valve & Coupling, Baomain, Pneumadyne, Watts, Homewerks, Cash Acme - Shark Bite, Hydro Master, Supco, Wilkins, Chief, Honeywell, Taco, SharkBite, & Magister Hydraulics. Hurry! Limited time offers. Offers valid only while supplies last.
Prince Two-Way Detent Valve, Model# LS-3010-2
4.3 out of 5 stars with 29 reviews
For open center systems. Two-way detent; 3/4in. in/out & 3/4in. work ports. Relief valve adjustable to 2750 PSI, preset at 2250 PSI, flow rating up to 25 GPM. Automatically kicks back to neutral when cylinder completes stroke. Built-in relief valve ports. Hydraulic balanced, hard chrome plated spool. Handle can be installed in up or down position. Detent release pressure adjustable from 600 to 2000 PSI. Warning: using a pressure detent in both directions can be dangerous. Working Port (in.):
Sxstar Water Pressure Regulator Brass Lead-free Adjustable DN15 1/2inch Bspp Water Pressure Reducing Valve with Pressure Gauge Bar/Psi
mpn: AB-122, ean: 0723576436812,
4.3 out of 5 stars with 177 reviews
Features: The valve is made of brass, durable and easy to install. Suitable for both cold water and hot water. Easy to monitor the pressure value with the pressure gauge which can be mounted on valve. Built-in spring pressure regulator, can manage to adjust the outlet pressure of the water. Applies to below situation and area: hydraulic instability, water flow too fast, water purifiers, solar energy, gas heater and faucet. Specifications: Water Pressure Reducing Valve Material: Brass Model:
Febco 905356 - Complete Rubber Kit 1" for 860/ 860U/ 880/ 880U RP
4.1 out of 5 stars with 270 reviews
The 1/2 - 2'' Febco 860 Series backflow preventers began production in 1997 and is still currently in production. It is a testable, bronze body reduced pressure zone assembly with an inline check design. It utilizes a single access cover with plastic check modules, relief valve, and retainer. The relief is pressurized via an internal sensing line. The model 860U has factory installed union ball valves and utilizes the same repair parts. The lead free version (LF860) was released in 2010 which
Garland 1086589 Valve Nat
You Save: 45%
mpn: 1086589, ean: 0046843352425,
4.2 out of 5 stars with 54 reviews
Garland 1086589 Valve Nat. Garland produces superior equipment for the foodservice industry. This is a genuine OEM (original equipment manufacturer) replacement part.Genuine oem replacement part. Garland and us range commercial kitchen equipment features products, parts and service - ovens, grills, griddles. Use genuine oem parts for safety reliability and performance.
Prince SS-2A1E Selector Valve, Monoblock, Cast Iron, 1 Spool, 3 Ways, 2 Positions, Lever Handle, 2500 psi, 20 gpm, 1/2" NPT Female
You Save: 5%
4.8 out of 5 stars with 33 reviews
The Prince valve model SS is a manual 3-way 2 position selector valve. This valve will allow one pump source to supply two circuits. With the standard selector spool pulling the spool out diverts oil to port nearest handle, pushing the spool in diverts oil to the port away from the handle. The valve has an inlet on both the bottom and front of the valve body. Selector with lever handle.Spool: 3 Ways, 2 Positions, ,.
Akent Motorized Ball Valve 1/2" Stainless Steel Ball Valve with Full Port, 9-24V DC and 2 Wire Auto Return Setup (1/2" brass full bore)
mpn: CWX-15, ean: 3837048447095,
4.4 out of 5 stars with 173 reviews
Technical Parameter: Product size: 1/2'' FNPT DN15 Maximum Working Pressure: 1.0MPa Circulation Medium: Water,Oil,Gas Rated Voltage: DC9-24V Wiring Control Methods:cr-04 Working Current: 80MA Open/close Time: 3-5 sec. Valve Body Material: Brass Actuator Material: Engineering Plastics Sealing Material: EPDM Cable Length: 0.5m Environment Temperature:-15~50 Celsius Liquid Temperature: -5~100 Celsius Manual Override: NO Indicator: NO Protection Class: IP65 Application: 1.HVAC
Dixon Valve 4PF6 Steel Thor Interchange Pneumatic Fitting, Socket, 1/2" Coupler x 3/4" - 14 NPTF Female Thread
By Dixon Valve & Coupling
4.2 out of 5 stars with 222 reviews
Dixon Valve P Series thor interchange pneumatic fitting. Nitrile (Buna-N) pneumatically energized seals are standard, temperature range -40 degree F to +250 degree F. Steel componentry is plated using ROHS Compliant Trivalent Chrome. Made of steel. 1/2-inches body size. Rated pressure 300 pounds per square inch. Temperature range of -40 degrees F to +250 degrees F.P Series thor interchange pneumatic fitting. Made of steel. 1/2-inches body size. Rated pressure 300 pounds per square inch.
Baomain Manual Hand Lever Control Valve 4H310-10 G3/8" Air Inlet 5 Way 2 Position
mpn: 4H310-10, ean: 0711811395956,
4.8 out of 5 stars with 18 reviews
This Hand Lever Control Valve is 5 way 2 postions type, plastic covered handle.Hand Push Pull Mechanical Valve. Mechanical valves are reversing valves controlled by external manual force. Normally used to control the output signal of pneumatic systems.Used for controlling pilots or diaphragms of larger valves or small cylinders or any pressure system that is alternatively pressurized and exhausted.Operation Type: Manual; Working Medium: Clear Air. Position and Port Number: 5 Port 2 Position.
Watts 0889372 - 889372 - Check Rubber Parts Kit RK 2 1/2"-4" for 957/ 957RPDA RC4-RS, RP, (Red Silicone)
4.1 out of 5 stars with 182 reviews
Watts 957 Series Reduced Pressure Zone Assemblies began production in 2000 under the Hunter name. In 2002, Watts bought the rights off of Hunter and is still manufacturing the devices. They are available in sizes 2 1/2 - 10'' and are constructed of stainless steel. The 957 Series has become a top seller of Watts due to the light weight design and short lay lengths. It is also offered in a number of configurations with many valve options. To access the check assemblies there is a stainless steel
Homewerks VSC-STD-B4B Sillcock, Female Thread, Brass, 3/4-Inch
mpn: VSCSTDB4B, ean: 0879420000743,
4.5 out of 5 stars with 261 reviews
Mueller/B & K 108-004 Outdoor Hose Lawn Faucet 3/4-Inch Brass Female Pipe Thread Sillcock3/4-Inch hose thread outlet. Meets ANSI / NSF 61 low lead requirements. CSA B125 Certified.
Cash Acme 15836A-0150 Shark Bite Temperature and Pressure Relief Valves, 3/4-Inch 150 PSI
By Cash Acme - Shark Bite
You Save: 10%
sku: 166193, mpn: 15836A-0150, ean: 0697285600478,
4.4 out of 5 stars with 11 reviews
Intended for protection of hot water heaters and storage tanks. incorporates an inert thermal element coating that provides effective isolation from mineral deposits, liming, and galvanic corrosion.Cash Acme's full port ball valve now comes with SharkBite connections for easy installation , this item cannot ship to CA or VT. Incorporates an inert thermal element coating that provides effective isolation from mineral deposits, liming and galvanic corrosion. Cast bronze body with male inlet and
Supco BPV31 Bullet Piercing Valve
You Save: 25%
mpn: BPV31, ean: 0674897878754,
4.0 out of 5 stars with 39 reviews
The only valve with a permanent type, patented gasket application Creates a permanent, leak-proof seal that will withstand any pressure and temperature for the life of the unit Furnished with adapter sleeves for multiple use application Hex key included No tools required 1/4'' male flare outlet.Manufacturer model # BPV31. Genuine Replacement Part. Supco Item. Whirlpool item.
WILKINS 375 3/4" RP COMPLETE ASSEMBLY
sku: WI34-375, mpn: WI34-375, ean: 0612052081359,
4.0 out of 5 stars with 37 reviews
WILKINS 375 3/4' RP COMPLETE ASSEMBLY.
CHIEF Double-Acting Hand Operated Hydraulic Pump With Handle: 1.3 Gallon Reservoir, 3625 PSI, 18 Lbs, 3/8" NPT Ports, 220996
mpn: 4112737, ean: 0615986035498,
4.2 out of 5 stars with 23 reviews
Manual hand pumps are designed to create flow of hydraulic oil, usually for activation of a hydraulic cylinder. They can be used in single or double acting applications.Double-Acting Hand Operated Hydraulic Pump. 1.3 Gallon Reservoir, 3625 PSI, 18 Lbs.. 3/8'' NPT Ports, Comes With Handle.
Taco 5003-C3 Series 5000 Mixing Valve, 3/4" Sweat Connection, Forged Brass
mpn: 5003-C3, ean: 0687752787146,
4.6 out of 5 stars with 30 reviews
This versatile NSF 61 and ASSE 1017 mixing Valve provides the ultimate performance for domestic hot water applications. The 5000 Series ASSE 1017 Certification allows for domestic hot water storage at temperatures high enough to increase the effective storage capacity of a water heater, kill harmful bacteria and still be delivered at a safe 120°f or less. The valves unique design and advanced thermostatic element ensures a stable mixed water temperature throughout the extended 85°-176°f
SharkBite 24737LFA Slip Ball Valve 1 Inch, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
mpn: 24737LF, ean: 0697285247376,
4.0 out of 5 stars with 19 reviews
CUT. PUSH. DONE.The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue. SharkBite uses high quality forged lead-free brass for their 1 inch brass slip ball valve with a single ball valve handle.
Hydraulic Directional Control Valve 1 spool 21 GPM Flow 4-way Tandem Center
4.7 out of 5 stars with 55 reviews
This hydraulic directional control valve is designed to manage and direct hydraulic oil flow in between hydraulic pumps and hydraulic cylinders, motors, tanks, etc. Its' compact design allows to use the control valve in small tractors, tractors loaders, log splitters & other mobile applications. All directional control valves are manufactured in Europe with American standards under ISO 9001 quality certificate. The products can operate in harsh conditions with temperature anywhere from 5F and