Dwyer® Multi-Jet Water Meter, WM2-A-C-04, 1'' NPT, 50 GPM, Brass Body by Dwyer at Scranton Sewer. MPN: WM2-A-C-04. Hurry! Limited time offer. Offer valid only while supplies last. Dwyer® Series WM2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows for simplicity and accuracy
Product Description & Reviews
Dwyer® Series WM2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows for simplicity and accuracy with wide flow ranges, even in low flow applications. The magnetically driven, hermetically sealed register will not leak or fog and is completely separated from the water. These water meters are designed for long service life and maintenance-free operation, even under harsh conditions. Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS. (Standard range shown in picture).
Features & Highlights
- Coupling Size: 1" NPT
- Max Flow: 50 GPM; Nominal Flow: 3 to 50 GPM; Transitional Flow: 0.75 GPM
- Limits: Temperature: 104°F (40°C); Pressure: 232 psi (16 bar)
- Accuracy: Transitional Flow: ±5%; Nominal Flow: ±2%
- Wetted Materials: Body: Brass, polyethylene; Couplings: Brass; Measuring Chamber: Polyethylene, ABS plastic, ferrite, acetal
Dwyer Instruments, Inc.
Dwyer Instruments, Inc.
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Dwyer, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By Sotera Systems
mpn: 825X700, ean: 0089404191217,
Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. We use only the most durable materials to insure long life and dependa...
K600/3 PULSER 1in GAS DIESEL METERFluid Electronic Meter 2.64-26.4 gpm. Accuracy +/- .5%. Fluids: Diesel, Light oil. Pulsar 133 p.gal, Viscosity 10-2000 cST, Max working pressure 426 psi. IN/OUT connection 1" BSP. Weight 3.7lbs.Designed to measure th...
EZ-View Flow Meters For Water. 1/2 inch ports. EZ to install, in any position. Polysulfone bodies for standard applications. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 perce...
By Gems Sensors
The FT-330 is a highly accurate and repeatable, Hall Effect turbine flow sensor designed for low flow OEM applications. This low cost, NSF Std. 61 listed flow sensor is ideal for water or beverage dispensing applications or any application with water...