GPI 113255-1, 01A31GM Aluminum Turbine Fuel Flowmeter with Digital LCD Display, 3-30 GPM, 1-Inch FNPT Inlet/Outlet, 0.75-Inch Reducer Bushings
Huge Savings Item! Save 12% on the GPI 113255-1, 01A31GM Aluminum Turbine Fuel Flowmeter with Digital LCD Display, 3-30 GPM, 1-Inch FNPT Inlet/Outlet, 0.75-Inch Reducer Bushings by GPI® The Proven Choice® at Scranton Sewer. MPN: 01A31GM. Hurry! Limited time offer. Offer valid only while supplies last. The GPI 01A31GM digital turbine flowmeter is made from durable cast aluminum and features an LCD display that is accurate to +/-5 percent of reading.
Product Description & Reviews
The GPI 01A31GM digital turbine flowmeter is made from durable cast aluminum and features an LCD display that is accurate to +/-5 percent of reading. This economical turbine meter is designed for flow rates from 3 to 30 GPM and is factory calibrated in gallons for use with diesel, gasoline or kerosene. The lightweight 01A31GM mounts easily to the end of a hose and is ideal for use with free flow gravity systems or combined with an electric transfer pump as part of a fuel transfer system. The GPI 01A31GM digital flow meter comes with two 0.75-inch reducers to work with either 1-inch or 0.75-inch line sizes, 0.75-inch MNPT pipe nipple and two standard AAA batteries.
Features & Highlights
- Auto-off display turns off after 1 minute of inactivity to extend battery life. Flow range of 3 to 30 GPM (10 to 100 LPM).
- Typical accuracy is 2.5 percent (accuracy can vary to 5 percent). Reducer bushings provide versatility for use with 1-inch or 0.75-inch line sizes.
- Can be mounted on hose end for easy meter reading. Powered by two field replaceable AAA batteries.
- Features one cumulative and one resettable batch total. For use with gasoline (gasohol up to E15), diesel fuel (bio-diesel blends up to B100) and kerosene.
- Wetted materials: aluminum housing, nylon rotor, ceramic bearings, tungsten carbide shaft, 316 stainless steel rings and zinc plated steel bushings.
GPI® The Proven Choice®
Great Plains Industries
Great Plains Industries
8 x 9 x 3 inches
7.1 x 2.6 x 9 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by GPI® The Proven Choice®, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By M&A INSTRUMENTS INC
mpn: TDS-100H-S1+M2, ean: 0519805775469,
Accuracy: ±1% of reading at rates>0.2 mps
Response Time: 0-999 second, user-configurable
Flow Range: ±32m/s
Measuring Pipe Size: DN50-700mm (in this listing is for DN50-700mm. If you choose other transdu...
mpn: FLCP-1608, ean: 0713458680334,
Features: Easy to install,size is small. Can connect to flow sensor,temperature sensor,solenoid valve.monitor gases,liquid flow.quantitative flow control,total flow alarm. Monitor real-time flow rate. Display temperature of the liquid.need to extra a...
mpn: 807C1, ean: 0089404110980,
The 807C1 Mechanical flow meter has a large easy to read display, flow ports can be positioned vertically or horizontally, UL/cUL listed, handles fluid of any viscosity, rated for Gasoline, Diesel, Kerosene, mineral spirits, Stoddard solvents and hep...
Dwyer® Series WM2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows for simplicity and accuracy with wide flow ranges, even in low flow applications. The magnetically driven, hermetically sealed r...