Midland 22-010 Brass Insert, 1/4'' Size, 0.50'' Length
Midland 22-010 Brass Insert, 1/4'' Size, 0.50'' Length by Midland at Scranton Sewer. MPN: 22-010. Hurry! Limited time offer. Offer valid only while supplies last. Brass Insert, 1/4'' Size, 0.50'' Length, Midland Brass insert, 1/4 inch size, 0.50 inch Length., Brass Insert, 1/4'' Size, 0.50'' Length0.50 inch. 0.163 inch. 0.02 lb weight. Brass.
Product Description & Reviews
Brass Insert, 1/4" Size, 0.50" Length, Midland Brass insert, 1/4 inch size, 0.50 inch Length., Brass Insert, 1/4" Size, 0.50" Length0.50 inch. 0.163 inch. 0.02 lb weight. Brass.
Features & Highlights
- 0.50 inch
- 0.163 inch
- 0.02 lb weight
Midland Metal Mfg.
Compression Fitting Tube Inserts
Midland Metal Mfg.
2 x 2 x 2 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Midland, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing
mpn: 3 TIZ .125-B,
The Parker A-Lok 3 TIZ.125-B compression tube fitting is made of brass and connects to tubing on both ends. This insert fitting has one or more ribs for creating a tight seal and connects two pipes or tubing in a straight run. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. This fitting is suitable for use in chemical, petroleum, power generation,
By Parker Hannifin
Parker's hi-duty fittings are preassembled with the sleeve machined onto the nut. During assembly the sleeve breaks away from the nut and seals on the tubing. This unique design creates tight; leak free joints that withstand pressures of most commonly used types of tubing including seamless steel tubing, copper, Brass and thermoplastic tubing. This design also provides a vibration dampener which enables joints to stand up under moderate vibration.All brass construction. No flaring, soldering or
The Parker A-Lok PC-316 port connector fitting is made of stainless steel 316 and has tube connectors. This port connector fitting connects pipes or fittings with different end types, diameters, or materials. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. It is made of stainless steel for resistance to scaling and corrosion. The operating temperatures for this fitting range from -425 to 1200 degrees F, and it uses imperial unit