Scranton Sewer
 

Milwaukee Valve BB2-100 Series Bronze Butterfly Valve, Unibody, Stainless Steel 304 Disc, Lever Handle, 1'' NPT Female


Huge Savings Item! Free Shipping Included! Save 19% on the Milwaukee Valve BB2-100 Series Bronze Butterfly Valve, Unibody, Stainless Steel 304 Disc, Lever Handle, 1'' NPT Female by Milwaukee at Scranton Sewer. MPN: BB2-100 - 100. Hurry! Limited time offer. Offer valid only while supplies last. The Milwaukee Valve BB2-100 series unibody butterfly valve is made of bronze with a stainless steel 304 disc, and it has a lever handle and female


Milwaukee Valve BB2-100 Series Bronze Butterfly Valve, Unibody, Stainless Steel 304 Disc, Lever Handle, 1'' NPT Female by Milwaukee
Brand: Milwaukee
4.9 out of 5 stars with 49 reviews
Condition: New
Availability: In Stock
$35.02
$28.51
You Save: 19%


Quantity:  

 



Product Description & Reviews

The Milwaukee Valve BB2-100 series unibody butterfly valve is made of bronze with a stainless steel 304 disc, and it has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This bronze valve, which is higher strength and more corrosion resistant than brass, is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. The one-piece construction reduces the possibility of leakage and it has female NPT threaded connections on both ends that create tighter seals than straight threads. The maximum pressure is 175 pounds per square inch (psi) for use with water, oil, and gas (WOG), and the working temperature range is 30 to 275 degrees F. The zinc-plated steel lever handle with a vinyl sleeve rotates the stainless steel 304 disc in the valve seat to fully open, throttle, or stop flow through the valve. This valve is for use in applications including natural gas and liquid propane shutoff, fuel oil and oil systems, HVAC, and both liquid and vacuum service.

Butterfly valves are used to regulate flow between pipes, tubes, and hoses by rotating a lens-shaped disc in the center of the valve and are suited for high-capacity, low-pressure applications. When the valve is fully opened, the disc face is parallel to the inlet and outlet of the valve, and when the valve is closed, the disc face is perpendicular to the opening of the valve. Butterfly valves may have a handle or lever that aligns with the disc position (open or closed) for manual flow control. They are primarily used in applications including agriculture, water treatment, fire protection, compressed air or gas, and vacuum service.

The Milwaukee Valve Company manufactures manual and actuated valves, controls, and control accessories. The company, founded in 1901, and headquartered in New Berlin, WI, meets International Organization for Standardization (ISO) 9001:2008 and 14001:2004 standards.

Features & Highlights

  • Made of bronze for higher strength and corrosion resistance than brass
  • Full port for higher operating efficiency and decreased friction than standard ports
  • 175 pounds per square inch (psi) rating for water, oil, and gas (WOG)
  • Unibody (one-piece construction) valve for reduced possibility of valve leakage
  • Female National Pipe Taper (NPT) threads form a tighter seal than straight threads

Additional Information

Manufacturer:Milwaukee Valve
Brand:Milwaukee
Model:BB2-100 - 100
Part Number:BB2-100 - 100
Publisher:Milwaukee Valve
Studio:Milwaukee Valve
MPN:BB2-100 - 100
UPC:697988118881
EAN:0697988118881
Package Weight:1 pounds
Package Size:6.2 x 3.4 x 3.4 inches

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by Milwaukee, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Last:
Email Address:
Your Message:

Related Best Sellers


Tri-Clamp Sanitary Tc-Clamp Tc Clamp Tri Clamp Butterfly Valve, 1-1/2" 1.5" (1.5 inch) OD:51MM,ID:35MM,3 Position, Silicone Seal Stainless Steel 304
By HODEE
mpn: HODEE,
Specification: Material: Stainless steel 304 Handle: 3 position plastic handle Seal: Silicone Operating Temperature : 15º F to 200º F Pressure:1.6MPA Size: 3/4" OD:50.5MM ID:19.0MM 1" OD:50.5MM ID:22.5MM 1-1/2" OD:50.5MM ID:35.1MM 2" OD:64MM I...

PT Coupling Ductile Iron Complete Assembly Painted Pump Foot Valve, 2"
By PT Coupling
mpn: 89100200,
Excellent abrasion and wear resistance. Good strength and toughness characteristics. ...

BOKYWOX 1.5" Sanitary Stainless Steel 304 Tri Clamp Butterfly Valve with Silicon Seal Quick Connector
By BOKYWOX
mpn: 43237-2, ean: 0733430154165,
Butterfly valve is a type of flow control device, used to make a fluid start or stop flowing through a section of pipe. It is well applied to stainless steel pipe systems for food beverage, dairy, brewing, pharmaceuatical, bio-pharmaceuatical and che...

Dixon BFVL300 Ductile Iron Threaded Lug Style Butterfly Valve with Aluminum Bronze Disc and Buna-N liner, 3" Size, 200 psi Pressure
By Dixon Valve & Coupling
mpn: BFVL300,
Threaded lug style butterfly valve. PTFE bushing. Buna-N seal and stem seals. Stainless steel top and bottom stems. The number of holes on the valve should match the number of holes for the specific flange size. Aluminum bronze disc, ASTM B148, ALY.9...

2-1/2" Bonomi 500N - Wafer Style, Epoxy Coated Cast Iron, Manual Butterfly Valve
By Bonomi valves
mpn: SCIN0121, ean: 0742118343821,
2-1/2" Bonomi 500N - Technical Specification Item Butterfly Valve Body Style Wafer Body Material Epoxy Coated Cast Iron Disc Material IRON NYLON 11 Seat Material EPDM Pressure Rating 150 PSIG (Refer to P/T Chart) Temp. Rating -30 to 250F (Refer to P/...



Privacy Policy / Terms of Service
© 2019 - scrantonsewer.org. All Rights Reserved.