Vixen Air 1/4'' NPT Suspension/Air Ride Manifold Solenoids/Valves (Two Corners) VXF1UM14C-2 by Vixen Air at Scranton Sewer. MPN: VXF1UM14C2. Hurry! Limited time offer. Offer valid only while supplies last. These manifold valves inflates and deflates up to two Air Springs using two ¼'' NPT Intake and two ¼'' NPT Exhaust ports. The ports to connect the
Product Description & Reviews
These manifold valves inflates and deflates up to two Air Springs using two ¼" NPT Intake and two ¼" NPT Exhaust ports. The ports to connect the air lines to the Air Springs are ¼" NPT while the ones to connect the air lines to the air gauges are 1/8" NPT. The robust internal solenoid valve architecture maximizes flow rates, guarantees operation up to 230 PSI for millions of cycles and provides the cleanest installation and most reliable operation on the market. ¼" NPT Suspension Manifold Air Valves (Two Corners) Power Source: 12V Max Air Pressure: 230 PSI Two ¼" NPT Female Inlet ports (Each Manifold) Two ¼" NPT Female Exhaust ports (Each Manifold) One ¼" NPT Female Air Spring Port (Each Manifold) One 1/8" NPT Female Air Gauge Port (Each Manifold) 2-way valve (normally closed) Pre-wired for easy Installation Included with this kit: ¼" NPT Plug x 2 (to close one of the intake port if running only one air line from the tank to the manifold) 1/8" NPT Plug x 2 (to close one of the Air Gauge Port if not planning to use Air Gauges) Mounting Hardware Dimensions: 3-1/8" W x 2-¾" H x 2-1/8" D Note: Each valve will operate one air spring (Inflate/Deflate)
Features & Highlights
- Power Source: 12V, Max Air Pressure: 230 PSI
- Two ¼ inch NPT Female Inlet ports (Each Manifold)
- Two ¼ inch NPT Female Exhaust ports (Each Manifold)
- One ¼ inch NPT Female Air Spring Port (Each Manifold)
- One 1/8 inch NPT Female Air Gauge Port (Each Manifold)
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Vixen Air, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
This 12-Ton Capacity Strongway Hydraulic Shop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. Polished inner cylinder walls extend the life of the hydraulic seals to minimize abrasion and wear, w...
mpn: L11020101007-1, ean: 6905867515084,
Technical Parameters: *Quart: 10 Quart *Reservoir: Metal Reservoir *2.0 GPM; SAE # 6 Port *Voltage: DC 12V *Acting: Double-acting *Mounting: Horizontal Mount*1500 PS Max Relief Setting on B port *3200 PSI Max. Relief Setting for Increased Lifti...
mpn: WM-9/WM0120QC, ean: 0089837273641,
WellMate® composite tanks are the tank of choice in residential and commercial applications for their unmatched durability. Their fiberglass construction makes the tanks impervious to rust. In addition, their epoxy-resin sealed outer shell will not ...
For Load: Maximum load can not exceed the rated capacity The load can not exceed the half of the capacity when all tubes used. The extension of the piston can NOT exceed the stroke. For Safety: Working oil:No 10 Check the level of oil,if it is ...